Re: Windows 2000 - Accept multiple VPN from same external IP

Tech-Archive recommends: Speed Up your PC by fixing your registry

"Robert L [MS-MVP]" <noreply@xxxxxxxxxxx> wrote in message
news:uUDPyTBUFHA.2128@xxxxxxxxxxxxxxxxxxxxxxx
what's the error code when they can't? And how do you assign IP?
Thanks for reply. I get the dialog "Verifying Username and Password" then
"Error 721 - The remote computer did not respond".

The remote site has two PCs on an Actiontec 1524 DSL modem/router. It
supports 4 port VPN pass through via IPSEC. Actiontec confirmed that pass
through for more than 1 port also applied to PPTP. The two PCs running XP
at the remote site can both dial out to different VPN locations. They just
can't both dial our Windows 2000 Server at the same time. Each can get a
VPN to the server only when the other is not connected. Both are using
different user login accounts. I tried this again today at a different site
with a Fujitsu modem/Belkin router with same failure. Actiontec told me
that I needed to enable settings server side to "permit multiple VPN logins
using the same IP address", which made sense to me figuring that the
Actiontec might present the VPNs externally as a single IP address. I've
been unable to figure out how or where I would set this in SBS2000 which is
configured for 9 simultaneous VPN dial-in connections and we regularly have
4-5 active.


.

Relevant Pages

  • RE: VPN Error code 800 HELP!
    ... Can you visit Internet and OWA on SBS server? ... Just one PC get error code 800 connecting VPN connecting to SBS? ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN issues on Win2k Srvr
    ... what's the error code? ... Posting on MS newsgroup will benefit all readers and you may get more help. ... Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on ... Old server was running Win2k ...
    (microsoft.public.win2000.ras_routing)
  • Re: RAS Connection Issues
    ... what's the error code? ... Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on ... >I have a Win2k server and I have set up RRAS for VPN connections via IP ...
    (microsoft.public.win2000.ras_routing)
  • VPN and Mac
    ... I have a Win 2k3 server and want to connect via VPN with Mac's. ... individual shares. ... I get error code 36. ...
    (microsoft.public.windows.server.general)
  • RE: VPN Connection Problems
    ... Note that we are able to successfully VPN into the office. ... to browse the network, RDP to the server or even ping the server. ... > This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)