Windows 2000 Pro as Gateway

I have a small office with the following setup.
We connect to a static IP DSL connetion through a Wireless Dlink router.

The Dlink is set up as a DHCP server there are both wired and wireless PC on the network. I have a wired 2000 Pro machine that I am trying to set up as a Gateway for VPN. The home office wants me to use only one VPN connection for everyone. So I am trying to set up the 2000 Pro machine as the gateway. What I want to do is start the VPN on the "gateway" machine and then let everyone else connect to the VPN using it. I have assigned it a static IP and manually entered DNS. It has the DLINK set as it's gateway

Dlink -
LAN IP 192.168.1.50
LAN SM 255.255.255.0

2000 Pro "Gateway"
IP 192.168.1.100
SM 255.255.255.0
GW 192.168.1.50
DNS manually entered

Other machines set with Static IP's
IP 192.168.1.xxx
SM 255.255.255.0
GW 192.168.1.100
DNS Manually entered

The gateway machine browses the internet with no problem, but none of the other machines can connect to the internet.

Also the gateway machine connects to the VPN OK and can still browse the internet after connected but none of the other machines can access the VPN.

I had it working at one time but for some reason that I can't figure out it broke.

Thanks in advance for the help.

FRISBEE
.

Relevant Pages

  • Re: A RAS/VPN "Is it just me?" question
    ... You have a T1 at the office connected to a Cisco ... Then you say you have a Dlink at the office and a Dlink at ... If you are adventurous you could have me try to vpn from one of my ... >> router? ...
    (microsoft.public.windows.server.sbs)
  • Re: weird gateway to gateway vpn issue
    ... but then the vpn ... web sites from site B I have to disconnect the gateway to gateway ... has a domain controller that connects over the internet through ... to the internet through their local ISA server at any one time. ...
    (microsoft.public.isa.vpn)
  • Re: VPN From W2K/Pro to W2K Server Doesn;t Work Through Firewall
    ... and VPN client. ... >performing the gateway, routing and NATting. ... >> that do not have IPsec passthrough because the IP ... >> while tunnel mode protects the IP layer as well. ...
    (microsoft.public.win2000.security)
  • Re: Coexistence and routing of two internet feeds
    ... this is a routing problem that RRAS should be able to ... will just use one gateway, and only switch if that goes down. ... for a VPN link because you know exactly what traffic needs to go over the ... > routing table point all internet traffic to the VSAT and VPN goes to DSL. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Windows 2000 Pro as Gateway
    ... Well I turned out tne Routing and Remote Access service and did a registry hack I found at Http://howtonetworking.com. ... Now the other computers can browse the internet using the gateway PC, but they still cannot use the VPN connection on the gateway. ...
    (microsoft.public.win2000.ras_routing)