Re: Win Server 2003 RAS routing problems

you have a routing issue. I don't see the default gateway in the routing table. Also what's the 127.0.0.0            255.0.0.0 for?
For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

I recommend Brinkster for web hosting!

Hi, have would appreciate some advice as i have been trying all day
and i am now stuck :( I was under the impression that any data coming
in on the dial in interface would have replies sent back out on the
same interface... it seems as if one of my servers doesnt know where
to send the reply.

I have a windows 2003 routing demand dial modem interface which calls
a small windows 2000 pro box which is running RAS.

I have set the link to dial when it sees packets goto the address
192.9.100.0.
The win2k3 server is also running on a lan segment with the IP address
192.9.200.0 (subnet mask 255.255.255.0).

When the connection is established to the win2k box i can ping from
the win2k3 server ok over the ppp link... however when i try to ping
from other machines on the win2k3 lan (for example machine
192.9.200.10) i see the ping get to the win2k box ok (with packet
sniffer), however no reply is sent back.

I am really stuck on how to procede, i am having trouble adding a
route on the win2k box to send any data out on the link that the
person has dialed in on, indeed im not sure i should need to do this?

I hope this makes sense, is what i am trying to do possible with win2k
professional? We are running this system remotely in some equipment so
we havent got the resources to run server.

Many thanks in advance,

Chris

Relevant Pages

  • Win Server 2003 RAS routing problems
    ... and i am now stuck:(I was under the impression that any data coming ... The win2k3 server is also running on a lan segment with the IP address ... When the connection is established to the win2k box i can ping from ...
    (microsoft.public.win2000.ras_routing)
  • Re: Win2k routing issues
    ... The static route on the NT Machine is as follows. ... The 10.194.44.1 is the IP address of the Win2k on the acrnet. ... but I still can't ping any other machines. ... I agree about not using dynamic IP, if I can prove routing in both ...
    (microsoft.public.win2000.networking)
  • Re: Fedora 4 Routing table question
    ... Fedora 4 Routing table question ... maybe it isn't my routing table. ... boxes can ping the Linux box and the Linux box can ping the windows ...
    (Fedora)
  • Re: Dual NICs, Routing Problem
    ... OK - notice that ping doesn't complain about unknown or unreachable host. ... ARP reply. ... >I think the issue is that the routing table is not working though. ...
    (alt.os.linux.suse)
  • FreeBSD routing
    ... I'm new to FreeBSD and trying to make the transition from Linux. ... thing that has me stumped is a routing question... ... turning these on until I can at least ping the new box. ...
    (freebsd-questions)
Loading