Unable to access private network from the VPN (NAT)

I have users successfully connecting to the VPN through my public, they are
able to access both interfaces on the VPN server however they are unable to
access any of the machines on the private network. Within the Windows 2003
VPN setup I was able to forward ports to specific machines and have the VPN
users access that but ideally I would like to give the users unrestricted
access to the private network. Is this possible if so how? Private network
is 192.168.1.0/24
.

Relevant Pages

  • Odd VPN name resolution problem. Please...
    ... There are lots of posts about VPN name resolution problems. ... The machines are running either Win2k ... pro or XP pro. ... The VPN server machine name *doesn't always* appear in "My Network ...
    (microsoft.public.win2000.networking)
  • Re: Win2k Ras/VPN and a SCO Unix Machine and some difficulty getting to the SCO Machine [LONG]
    ... the VPN connections using the VPN server and its IP range. ... DNS 192.168.1.192 is the target IP for the VPN with a mask ... address as all other machines are. ...
    (comp.unix.sco.misc)
  • Re: VPN users cannot see domain shares
    ... > I have a a windows xp machine that succesfully connects to a windows ... > 2003 domain via VPN. ... Register all machines as WINS clients on their NIC-IP ... properties and make sure the VPN server also assigns ...
    (microsoft.public.win2000.networking)
  • Re: VPN users are unable to access the private network =/
    ... This works....its just once i'm connected I can only connect to machines on ... the private network that have been specified ... >> Computer Browsing over VPN ... Ping remote computers by NetBIOS Name, ...
    (microsoft.public.win2000.networking)
  • RE: vpn
    ... you can use a virtual private network (VPN) to connect components ... How to configure a connection to a virtual private network in Windows ...
    (microsoft.public.windows.server.sbs)