Re: Windows 2000 and Windows XP RAS
From: Robert L [MS-MVP] (noreply_at_hotmail.com)
Date: 02/21/05
- Next message: Janani V: "Re: copy a profile or policy?"
- Previous message: Puja Pandey[MSFT]: "Web Chat on 24th Feb - Deploying and managing remote access clients running Windows 2000 and Windows XP"
- In reply to: tshaw73058: "Windows 2000 and Windows XP RAS"
- Next in thread: Samir Jain [MSFT]: "Re: Windows 2000 and Windows XP RAS"
- Reply: Samir Jain [MSFT]: "Re: Windows 2000 and Windows XP RAS"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 21 Feb 2005 08:54:07 -0600
quoted from http://www.howtonetworking.com/vpnsetup.htm
How to configure W2K server as VPN server
To setup a Windows 2000 server for VPN, open Routing and Remote Access console in the Administrative Tools folder, right-click the server and then click Configure and Enable Routing and Remote Access>Virtual private network [VPN] server. Click Next if TCP/IP is only protocol you will use. Select a connection you will connect to on the Internet Connection. You will have two options to assign IP to VPN clients. The default is Automatically. It is recommended to configure the server to assign client addresses from a static address pool, rather than assigning addresses from a DHCP server. If you configure RAS to assign client addresses from a static address pool, clients inherit the DNS and WINS settings from the RAS server. If your RAS server can browse the network, clients should also be able to browse the network with the same settings. If you prefer DHCP, verify that DHCP scope option 44 (WINS/NetBIOS name server) points to the WINS server and scope option 6 shows the address of your DNS server. When you don't define these options, you almost guarantee problems with client browsing. Finally, you can select using RADIUS or not.
For more and other information, go to http://howtonetworking.com.
Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.
Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
I recommend Brinkster for web hosting!
"tshaw73058" <tshaw730@hotmail.com> wrote in message news:adab5c7a4761d417c414060ef4021dc7@localhost.talkaboutsoftware.com...
I wanted to know how to setup and test RAS for Windows 2000 Server and
Windows XP. The Server has a DSL Internet connection and the Windows XP
may be on Dialup. Also I would like to know how to set it up so they can
also use netowrk connection when in the office.
Thank you for any help you may be able to provide.
- Next message: Janani V: "Re: copy a profile or policy?"
- Previous message: Puja Pandey[MSFT]: "Web Chat on 24th Feb - Deploying and managing remote access clients running Windows 2000 and Windows XP"
- In reply to: tshaw73058: "Windows 2000 and Windows XP RAS"
- Next in thread: Samir Jain [MSFT]: "Re: Windows 2000 and Windows XP RAS"
- Reply: Samir Jain [MSFT]: "Re: Windows 2000 and Windows XP RAS"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
