Re: RAS Connection works only if LAN Adapter is disabled

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Robert L [MS-MVP] (noreply_at_hotmail.com)
Date: 01/29/05 

Date: Sat, 29 Jan 2005 09:53:21 -0600

sounds like routing issue. posting the result of routing table here may
help. to do that, use route print command. 

-- 
For more and other information, go to  http://howtonetworking.com.
Don't send e-mail or reply to me except you need consulting services. 
Posting on MS newsgroup will benefit all readers and you may get more help.
Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on 
http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on 
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
"Markus Broy" <broy@datawebservices_no_spam.de> wrote in message 
news:OvpC2XeBFHA.3824@TK2MSFTNGP10.phx.gbl...
> Hello,
>
> If I connect to a customer corporate network via RAS over ISDN I get only
> connection to any server if I disabled my LAN adapter and if I logged on
> with the local domain of my computer.
>
> If LAN is enabled or if I logged on in our domain it is possible to dial
> into the customer corporate network but I cannot access any server neither
> via name nor via IP address.
>
> Is there a possibility to connect to the customer network and to our LAN 
> at
> the same time?
>
> Thanks.
>
> Markus Broy
>
>

Relevant Pages

  • Re: DSL+NAT+w2k3
    ... Posting on MS newsgroup will benefit all readers and you may get more help. ... Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on ... > The second network card I label as WAN and set to the Static IP provided ... > The problem is that once I have the LAN set to the internal IP numbers all ...
    (microsoft.public.windows.server.networking)
  • Re: Dial In Server Routing
    ... Posting on MS newsgroup will benefit all readers and you may get more help. ... Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on ... > Never setup a dial in server, so the answer may be simple. ... > only has 1 network card with an IP of the 192.168.1.X range. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Routing & Remote Access stops responding....
    ... Posting on MS newsgroup will benefit all readers and you may get more help. ... >I found an error against the System section saying Routing & Remote Access ... >> Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on ...
    (microsoft.public.windows.server.networking)
  • Re: RRAS routing does not work after restart
    ... > Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net ... Posting on MS newsgroup will benefit all readers and you may get more help. ... but after restarting the server routing fails ...
    (microsoft.public.win2000.networking)