Re: Demand Dial

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Robert L [MS-MVP] (noreply_at_hotmail.com)
Date: 01/19/05

  • Next message: Dave: "Re: VPN 721 error"
    Date: Wed, 19 Jan 2005 12:24:43 -0600
    
    

    assuming you connect RRAS to PIX, the PIX ip pool may be different from the
    internal ip. posting the configuration of pix may help.

    -- 
    For more and other information, go to  http://www.ChicagoTech.net
    Don't send e-mail or reply to me except you need consulting services. 
    Posting on MS newsgroup will benefit all readers and you may get more help.
    Bob Lin, MS-MVP, MCSE & CNE
    Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on 
    http://www.ChicagoTech.net
    Networking Solutions, http://www.chicagotech.net/networksolutions.htm
    VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
    VPN Process and Error Analysis, http://www.chicagotech.net/VPN%20process.htm
    VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
    This posting is provided "AS IS" with no warranties.
    "bartman" <bartman@discussions.microsoft.com> wrote in message 
    news:63639FBC-2C05-4BC4-8EC9-399809698BAD@microsoft.com...
    >I have one ras server on my internal network behind a pix 515 firewall. I 
    >am
    > trying to use another ras server for a remote site outside my firewall to
    > create a vpn connection be able to access network resources. I able to 
    > create
    > a demand dial connection from the remote server. It shows that I am
    > connected, I can ping the pix and browse the interent. However I am not 
    > able
    > to ping anything beyond the firewall in my internal network. I have tried 
    > to
    > create a static route to the pix, but I still cannot ping the internal
    > network. An ideas on what I am doing wrong 
    

  • Next message: Dave: "Re: VPN 721 error"

    Relevant Pages

    • RE: [fw-wiz] PIX split tunneling
      ... Split tunneling is an excellent option for saving bandwidth and SA's on your ... To use a VPN the user would need access to the internet ( ... on a public network then if they change the config then they change it. ... If your users are inside the PIX then I don't understand the question. ...
      (Firewall-Wizards)
    • Re: cups relaying remote broadcasts to a local subnet (SOLVED)
      ... This sounds like an application that could use a vpn (virtual private ... network) over the internet. ... port 9100 it only has to be set up on the gateway machine. ...
      (Fedora)
    • Re: Using a Linksys router, should I also use Zonealarm?
      ... public internet to access corporate network. ... In the "old days" when people used to use Dial-In instead of VPN you ware ... protected by corporate Firewall -- since there was no public Internet ...
      (microsoft.public.security)
    • Re: cups relaying remote broadcasts to a local subnet
      ... This sounds like an application that could use a vpn (virtual private ... network) over the internet. ... The 10.x.x.x series of IP addresses is set aside as private address space. ...
      (Fedora)
    • PIX 515E dropping existing TCP connections
      ... I recently took over administration of a PIX 515E. ... network, and VPN to the PIX to access a private network. ... When the VPN is connected, I can SSH to hosts on the private network. ... PIX drops the connection after transferring just a few kilobytes. ...
      (comp.dcom.sys.cisco)