Re: Remote Access Server Issue
From: Bill Grant (not.available_at_online)
Date: 01/17/05
- Next message: Rod: "RRAS - so simple"
- Previous message: David Langschied: "Re: Remote Access Server Issue"
- In reply to: David Langschied: "Re: Remote Access Server Issue"
- Next in thread: David Langschied: "Re: Remote Access Server Issue"
- Reply: David Langschied: "Re: Remote Access Server Issue"
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 18 Jan 2005 09:30:57 +1100
The internal interface not active is a symptom, not a cause. It only
becomes active after a remote client connects. The internal interface is the
server endpoint of the PPTP connection.
If your server has a private IP and is behind a firewall, you need to
forward tcp port 1723 from the firewall to the server and connect to the
firewall's public IP. You cannot connect across the Internet to a private
IP.
"David Langschied" <DavidLangschied@discussions.microsoft.com> wrote in
message news:748A9E67-2B46-4A06-84DF-C3F555A561CF@microsoft.com...
>I cannot complete the connection. So I guess my answer is no. I do see an
> attempt to process user name and passowrd, but then I get a 628 error.
>
> I have checked the knowledge base on this error and have not found
> anything
> that corresponds with my server setup.
>
> This server is behind a firewall (Belkin Wireless router) and has a
> private
> address, 192.168.2.xxx. The VPN port, 1723, is open.
> From the remote location, the connecting computer is behind a firewall (I
> don't remember the brand, but it was replaced before the VPN was setup
> with
> one that was supplied by the ISP) and has a different IP address,
> 205.114.68.xxx. I can already connect to a server behind a firewall
> (Netopia) with a private address,192.168.1.xxx, from this location.
>
>
>
> "Robert L [MS-MVP]" wrote:
>
>> not sure the issue. can the server ping other and other ping the server?
>> or
>> post the result of ipconfig /all here.
>>
>> --
>> For more and other information, go to http://www.ChicagoTech.net
>>
>> Don't send e-mail or reply to me except you need consulting services.
>> Posting on MS newsgroup will benefit all readers and you may get more
>> help.
>>
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
>> http://www.ChicagoTech.net
>> Networking Solutions, http://www.chicagotech.net/networksolutions.htm
>> VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
>> VPN Process and Error Analysis,
>> http://www.chicagotech.net/VPN%20process.htm
>> VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
>> This posting is provided "AS IS" with no warranties.
>> "David Langschied" <DavidLangschied@discussions.microsoft.com> wrote in
>> message news:18DD03D9-552A-42D5-BB63-B430E7DC1847@microsoft.com...
>> > Hi!
>> > I am trying to setup an RAS on my Win 2K server. I have setup one
>> > before
>> > and it worked like a charm. This time though, it has not worked. I
>> > have
>> > looked over my configuration and have noticed one thing that looks
>> > out-of-line. The Internal Interface is not functioning. I have tried
>> > comparing the past setup with this one and have not noticed any
>> > differences.
>> > This leads me to this Newsgroup. What services start the Internal
>> > Interface
>> > or make it possible to start? I don't see any errors in the laslog
>> > file,
>> > so
>> > where else would I look for errors?
>> >
>> > Thanks!
>> >
>> >
>>
>>
>>
- Next message: Rod: "RRAS - so simple"
- Previous message: David Langschied: "Re: Remote Access Server Issue"
- In reply to: David Langschied: "Re: Remote Access Server Issue"
- Next in thread: David Langschied: "Re: Remote Access Server Issue"
- Reply: David Langschied: "Re: Remote Access Server Issue"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
