Re: Dial In Server Routing

From: Robert L [MS-MVP] (noreply_at_hotmail.com)
Date: 01/13/05 

Date: Thu, 13 Jan 2005 11:05:47 -0600

posting the result of client routing table here may help. 

-- 
For more and other information, go to  http://www.ChicagoTech.net
Don't send e-mail or reply to me except you need consulting services. 
Posting on MS newsgroup will benefit all readers and you may get more help.
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on 
http://www.ChicagoTech.net
Networking Solutions, http://www.chicagotech.net/networksolutions.htm
VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
VPN Process and Error Analysis, http://www.chicagotech.net/VPN%20process.htm
VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
This posting is provided "AS IS" with no warranties.
"Ryan" <Ryan@discussions.microsoft.com> wrote in message 
news:CE139262-7075-441E-ABFC-53F6D8EB0E4E@microsoft.com...
> I'm having a frustrating problem, that hopefully someone can help me with.
> Never setup a dial in server, so the answer may be simple (let's hope).
> I have a Windows 2000 Server (sp4).  This server only provices terminal
> services.  This server is actually sitting behind my firewall, and 
> therefore
> only has 1 network card with an IP of the 192.168.1.X range.  I configure
> routing and remote access to allow access via dial in.  I can dial up,
> connect, get an IP address (that I manually assigned).  It's 192.168.2.X.
> From there I'm sort of "stuck".  I can ping my IP address, I can ping the 
> IP
> address of the internal network card on the server (192.168.1.x), but I
> cannot ping anything else on my network (also in the 192.168.1.x subnet).
> Therefore, I can't really do anything!  :)
> Any help would be really apreciated.
> Thanks, Ryan

Relevant Pages

  • Re: DNS but No Web
    ... Routng how toTo setup Windows 2000/2003 as a router for a LAN, you need to two network adapters. ... To enable LAN routing. ... the server IP routing is disable that is the problem. ...
    (microsoft.public.windows.server.networking)
  • Re: RRAS Routing Problems
    ... erroneously routing through the DSL router. ... How to Setup Windows, Network, VPN & Remote Access on ... -All clients default routed to the RRAS Server ... 192.168.1.29: Cannot ping 192.168.2.29 ...
    (microsoft.public.windows.server.networking)
  • Re: Win2003 - Simple Quest, big Problem - Cant ping anywhere
    ... Post back with the routing table here may help. ... This server is behind the ... are addresses from the same network all of the servers are on. ... the ras server. ...
    (microsoft.public.win2000.ras_routing)
  • Re: RRAS Routing Problems
    ... The routing tables look good to me. ... How to Setup Windows, Network, VPN & Remote Access on ... > -All clients default routed to the RRAS Server ... > --Static route set to the remote route on the 192.168.2.0 network ...
    (microsoft.public.windows.server.networking)
  • RE: Newbies question: How should I do this?
    ... Thank you for posting here. ... The microsoft.public.windows.server.networking newsgroup is ... | I've always enjoyed having a server at my home network. ...
    (microsoft.public.windows.server.migration)
Loading