Re: Error 619: The specified port is not connected
From: Robert L [MS-MVP] (noreply_at_hotmail.com)
Date: 10/11/04
- Next message: Robert L [MS-MVP]: "Re: RAS stopped working"
- Previous message: Cybervic: "RAS stopped working"
- In reply to: Moe: "Error 619: The specified port is not connected"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 11 Oct 2004 09:50:37 -0500
1. logon slow could be DNS issue.
2. Error 619: this may help. quoted from http://www.ChicagoTech.net
Error 619: 1. The port was disconnected (or Error 645, Dial-Up Networking
could not complete the connection to the server and Error 930, The
authentication server did not respond to authentication requests in a timely
fashion. The Event Viewer shows: Event id: 20073, Description: The following
error occurred in the Point to Point Protocol module on port: port number,
UserName: user name. The authentication server did not respond to
authentication requests in a timely fashion). When using VPN to access a
remote network, W2K clients mat get above errors but not win9x and ME
clients. This issue occurs because the VPN server hasn't registered in
Active Directory.
2.You get this message when connecting via cable modems, dial up DOESN'T
have any issues.
Resolution: 1) This problem most likely is secure issue such as unsecured
password. So, check the settings.
2) It could be the hardware issue. Try to re-setup the device or download
the new driver or just reset the devices such as modem and router.
3) Reapply the service pack
4) If the RRAS is in a domain network, add the VPN to the appropriate group.
To do this, go to Active Directory Users and Computers>domain name>Users,
double-click the RAS and IAS Servers security group. Select the members and
add the VPN server to this group. 2) Type netsh ras add registeredserver at
a command prompt (registeredserver is vpn server name), and then press
ENTER.
-- For more and other information, go to http://www.ChicagoTech.net Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help. Robert Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on http://www.ChicagoTech.net This posting is provided "AS IS" with no warranties. "Moe" <anonymous@discussions.microsoft.com> wrote in message news:34c901c4af4b$23494970$a401280a@phx.gbl... >I have recently had a broadband connection, I installed > the drivers and change the computer settings (IP, DNS, > Gateway, .) and I have realized that my DSL line is not > active yet by the local carrier. > I went back to use my dial up connection, but it is not > longer working. > I am having below problems > > I restarted my computer several times, but it is taking > too long before it prompts me for the windows' login user > name & password. It takes about 3-4 min on "preparing > network connections..." > I use a VPN access, and my dialup is no longer working. I > no longer get to the stage where it prompts me for my > user name and passcode. I am receiving the following > error message "Error 619: The specified port is not > connected" > Detail: > "This is an rare error, but it is usually simple > First, restart your computer to make sure that any recent > configuration changes have taken place. > If restarting your computer doesn't solve the problem, > then: > Check your dial up networking configuration. > Verify that your dial up adapter is configured to use the > necessary TCP/IP protocol." > > I also have a non VPN access where I use an ISP for a > dialup, but I can no longer acess any web site. > I am not sure what cause the problem, but I didn't have > this issue before changing the Brodband settings. Could > you please help >
- Next message: Robert L [MS-MVP]: "Re: RAS stopped working"
- Previous message: Cybervic: "RAS stopped working"
- In reply to: Moe: "Error 619: The specified port is not connected"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
