VPN and "Use default gateway on remote network"
Date: Sun, 5 Sep 2004 13:06:30 +0100
When establish a VPN connection and uncheck the option "Use default gateway
on remote network" I acquire a new route to the network I'm connected.
I connect to the VPN Server and I received this IP - 10.0.1.2 and a route is
automatically created to that network:
Network Destination Netmask Gateway Interface Metric
10.0.0.0 255.0.0.0 10.0.7.11 10.0.7.11
The problem is the Netmask, is there a way to change this default Netmask
My 10.0.0.0 network is split in four sub-networks and only one is accessed
Hope you understand me.
- RE: Site-to-site VPN, SBS 2000
... to site VPN between the ADSL router and the remote network and you can not ... connect your LAN to the remote network. ... connect the SBS server and the LAN clients to the switch. ... And then create site to site VPN between the ...
- Re: VPN and XP SP2 woes
... I connected VPN, default gateway box Checked, and got a route print. ... Nothing is going over my VPN connection. ... >>> traffic in to the corporate network. ...
- OT: RRAS doesnt R
... A remote user now needs access to our network. ... She needs to connect via VPN ... Our office is only one subnet. ... Here's the routing table from a "route print" done on Dataman, ...
- Re: Using a Linksys router, should I also use Zonealarm? Internet Acceptable Use Policy
... depending on your VPN client when you connect to VPN server client will ... As soon as you connect to VPN server that will be default route. ... other network address. ... I created new default route for my internet traffic that points to my ISP. ...
- Re: Problem with route add and VPN
... here is what i am tying to access the destination network: ... the vpn connection is disconnected and reconnected. ... When I add the route it will only add sucessfully if I specify the ...