Re: PB netbios resolution

• Previous message: Anubis: "Re: Help with RAS configuration and multiple IP's"
• In reply to: Bill Grant: "Re: PB netbios resolution"
• Next in thread: Bill Grant: "Re: PB netbios resolution"
• Reply: Bill Grant: "Re: PB netbios resolution"
• Messages sorted by: [ date ] [ thread ]

Date: Thu, 8 Jul 2004 23:16:01 -0700

Thank bill too,

I'm so strick that I don't want to use host resolution juste Netbios, and I can't use your solution in my pb because I connect a lot of different lan with different DNS suffix (some lan have multi suffixe DNS).

Thank you very munch for the time to try to help me

-- 
Psu are here :]
"Bill Grant" wrote:
>    If you want the remote user to resolve names with just the simple name,
> make sure that the client has the correct DNS suffix configured in the
> connection properties. If the dialup connection has the correct DNS suffix,
> name resolution should work OK with just the simple name (assuming it has
> the correct DNS address).
> 
> "Psu" <Psu@discussions.microsoft.com> wrote in message
> news:AD6DF784-31DA-4CE1-8125-C0AC5D0E8BE9@microsoft.com...
> > Thank Steven for your answer,
> >
> > Yes WINS, lmhost and IP adresse are ok, but I really don't want to use
> this technologies.
> > I access in hight number lan (lot of without WINS) by vpn and large number
> of computers (dificulte to use lmhost or IP adresse) then I just want to use
> a "simple" netbios name
> >
> >
> > --
> > Psu are here :]
> >
> >
> > "Steven L Umbach" wrote:
> >
> > > Wins would probably help your problem. Browsing is  problematic over a
> vpn. It may
> > > help if the users tried mapping drive or created shortcuts to needed
> shares using the
> > > Ip address of the remote computer such as in \\xxx.xxx.xxx.xxx\sharename
> using the
> > > actual lan IP address which of course would need to be static to be
> effective. Also
> > > try using the fully qualified domain name such as
> \\computer.mydomain.com\share  if
> > > using a domain and domain controller for dns on the vpn connection.
> Otherwise
> > > consider using lmhosts files on the remote computers as explained in the
> KB link
> > > below. Note that entries in lmhosts files are case sensitive and you can
> use
> > > nbtstat -c after nbtstat -R to verify if the lmhosts file is configured
> > > correctly. --- Steve
> > >
> > > http://support.microsoft.com/default.aspx?scid=kb;EN-US;150800
> > >
> > > "Psu" <Psu@discussions.microsoft.com> wrote in message
> > > news:3376A549-9307-4965-B70B-23E8E98FB632@microsoft.com...
> > > > Sorry I d'ont find the same newgroup with Windows 2003 but this is my
> OS of RRAS.
> > > >
> > > > When a VPN client call a netbios name of the lan, the colling pass on
> the client
> > > VPN to the VPN server, but the VPN server don't send the answer to it
> local lan
> > > network ! (I test with the Microsoft Network Monitor). I tried to select
> the"Enable
> > > broadcast name resolution" in the proprities of RRAS W2k3 but nothing !
> > > > I d'ont have (and don't want) WINS, DNS resolution are OK.
> > > >
> > > > Sorry for my english, thank for the futur answer
> > >
> > >
> > >
> 
> 
> 

• Previous message: Anubis: "Re: Help with RAS configuration and multiple IP's"
• In reply to: Bill Grant: "Re: PB netbios resolution"
• Next in thread: Bill Grant: "Re: PB netbios resolution"
• Reply: Bill Grant: "Re: PB netbios resolution"
• Messages sorted by: [ date ] [ thread ]