Re: Unable to start the RRAS service
From: Pal (anonymous_at_discussions.microsoft.com)
Date: 06/11/04
- Previous message: RZ: "VPN and internet"
- In reply to: Sharoon Shetty K [MSFT]: "Re: Unable to start the RRAS service"
- Next in thread: Srivatsan [MSFT]: "Re: Unable to start the RRAS service"
- Reply: Srivatsan [MSFT]: "Re: Unable to start the RRAS service"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 11 Jun 2004 11:18:06 -0700
I tried article: 826899 but did't help. I haven't tried
article:299684 as I donot want RADIUS implemented. Any
other clues?
>-----Original Message-----
>Did you try these KB articles also?
>
>Error Message: Error 930; The Authentication Server Did
Not Respond to
>Authentication Requests in a Timely Fashion
>http://support.microsoft.com/default.aspx?scid=kb;EN-
US;299684
>
>Error 930" Error Message When You Use a VPN Connection
to Log On to a
>Server That Is Running Routing and Remote Access
>http://support.microsoft.com/default.aspx?scid=kb;en-
us;826899
>
>--
>Thanks,
>Sharoon
>---------------------------------------------------------
>This posting is provided "AS IS" with no warranties, and
confers no rights.
>
>"Pal" <anonymous@discussions.microsoft.com> wrote in
message
>news:1a21101c44e3d$ded1f5d0$a301280a@phx.gbl...
>> I tried the KB Article:227747. No change and the error
>> 930 still remains same.
>>
>> >-----Original Message-----
>> >Check if this KB article is helpful
>> >http://support.microsoft.com/default.aspx?scid=kb;EN-
>> US;227747
>> >
>> >--
>> >Thanks,
>> >Sharoon
>> >------------------------------------------------------
--- >> >This posting is provided "AS IS" with no warranties, and >> confers no rights. >> > >> >"Pal" <anonymous@discussions.microsoft.com> wrote in >> message >> >news:1a00c01c44db4$6d291f00$a101280a@phx.gbl... >> >> Thanks, this link helped me to re-start the RRAS >> service. >> >> Now I am stuck with client connectivity. Reporting >> error >> >> 930. >> >> >> >> >> >> >-----Original Message----- >> >> >Hi >> >> > >> >> >Maybe this will be of help: >> >> > >> >> >Reference Link: >> >> >http://support.microsoft.com/default.aspx?scid=kb; >> >> [LN];840686 >> >> > >> >> >You cannot start the Routing and Remote Access service >> >> on a Microsoft >> >> >Windows 2000 Server-based computer >> >> > >> >> >Important This article contains information about >> >> modifying the registry. >> >> >Before you modify the registry, make sure to back it >> up >> >> and make sure that >> >> >you understand how to restore the registry if a >> problem >> >> occurs. For >> >> >information about how to back up, restore, and edit >> the >> >> registry, click the >> >> >following article number to view the article in the >> >> Microsoft Knowledge >> >> >Base: >> >> >256986 Description of the Microsoft Windows Registry >> >> > >> >> >SYMPTOMS >> >> >======== >> >> >You cannot start the Routing and Remote Access service >> >> on a Microsoft >> >> >Windows 2000 Server-based computer. The following >> error >> >> messages are logged >> >> >in the system event log: >> >> > >> >> >Type: Error >> >> >Source: Service Control ManagerCategory: None >> >> >Event ID: 7024 >> >> >Description: >> >> >The Routing and Remote Access service terminated with >> >> service-specific >> >> >error 87 (0x57). >> >> > >> >> >Type: Error >> >> >Source: RemoteAccess >> >> >Category: None >> >> >Event ID: 20152 >> >> >Description: >> >> >The currently configured authentication provider >> failed >> >> to load and >> >> >initialize successfully. The parameter is incorrect. >> >> > >> >> >CAUSE >> >> >===== >> >> >This issue may occur if the Internet Authentication >> >> Service (IAS) database >> >> >is damaged. IAS and the Routing and Remote Access >> >> service use the IAS >> >> >database. >> >> >RESOLUTION >> >> >========== >> >> >To resolve this issue, follow these steps. >> >> > >> >> >Warning: If you use Registry Editor incorrectly, you >> may >> >> cause serious >> >> >problems that may require you to reinstall your >> >> operating system. Microsoft >> >> >cannot guarantee that you can solve problems that >> result >> >> from using >> >> >Registry Editor incorrectly. Use Registry Editor at >> your >> >> own risk. >> >> > 1. Extract the Ias.mdb file and extract the >> >> Dnary.mdb file from the >> >> >Windows 2000 Server CD to the %WinDir%\System32\Ias >> >> folder on the disk. To >> >> >do this, follow these steps: >> >> > a. Click Start, click Run, type cmd in >> >> the Open box, and then click OK. >> >> > b. At the command prompt, type the >> >> following lines. Press ENTER after >> >> >each line: >> >> > Drive: >> >> > cd i386 >> >> > ren %windir%\system32\ias\ias.mdb %windir% >> >> \system32\ias\iasOLD.mdb >> >> > ren %windir%\system32\ias\dnary.mdb %windir% >> >> \system32\ias\dnaryOLD.mdb >> >> > expand ias.md_ %windir%\system32\ias\ias.mdb >> >> > expand dnary.md_ %windir%\system32\ias\dnary.mdb >> >> >Note: In this step, Drive is a placeholder for the >> drive >> >> letter of the >> >> >CD-ROM drive or of the DVD-ROM drive that contains the >> >> Windows 2000 Server >> >> >CD. >> >> > 2. Register the Oledb32r.dll file and register >> >> the Oledb32.dll file. To do >> >> >this, follow these steps: >> >> > a. At the command prompt, type the >> >> following lines. Press ENTER after >> >> >each line: >> >> > Drive: >> >> > cd program files\common files\system\ole db >> >> > regsvr32 oledb32r.dll >> >> >Note In this step, Drive is a placeholder for the >> drive >> >> letter where the >> >> >Program Files folder is stored. >> >> > b. When you receive a message that >> >> indicates that the operation is >> >> >successful, click OK. >> >> > c. At the command prompt, type the >> >> following line, and then press ENTER: >> >> > regsvr32 oledb32.dll >> >> > d. When you receive a message that >> >> indicates that the operation is >> >> >successful, click OK. >> >> > e. Type exit, and then press ENTER to >> >> quit Command Prompt. >> >> > 3. Start the Routing and Remote Access service. >> >> To do this, follow these >> >> >steps: >> >> > a. Click Start, point to Programs, point >> >> to Administrative Tools, and >> >> >then click Services. >> >> > b. Right-click the Routing and Remote >> >> Access service, and then click >> >> >Start. >> >> > >> >> >REFERENCES >> >> >========== >> >> >For more information about IAS in Windows 2000 Server, >> >> visit the following >> >> >Microsoft Web site: >> >> >> >http://www.microsoft.com/windows2000/technologies/communi >> >> cations/ias >> >> > >> >> > >> >> >Shilpa Sinha >> >> >This posting is provided "AS IS" with no warranties, >> and >> >> confers no rights. >> >> > >> >> >. >> >> > >> > >> > >> >. >> > > > >. >
- Previous message: RZ: "VPN and internet"
- In reply to: Sharoon Shetty K [MSFT]: "Re: Unable to start the RRAS service"
- Next in thread: Srivatsan [MSFT]: "Re: Unable to start the RRAS service"
- Reply: Srivatsan [MSFT]: "Re: Unable to start the RRAS service"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
