Re: Please help...

From: Kadirvel C Vanniarajan [MSFT] (kadirvv_at_online.microsoft.com)
Date: 05/28/04


Date: Fri, 28 May 2004 14:40:15 +0530

For installing NetBeui on WinXP, follow the following KB article
HOW TO: Install NetBEUI on Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;301041

-- 
Kadir
kadirvv@online.microsoft.com [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.
"Victor" <anonymous@discussions.microsoft.com> wrote in message
news:12d6b01c44352$05b4a2c0$a601280a@phx.gbl...
> Thanks for the response. I will need to check again... But
> the problem is only on  XP professional clients to which i
> am not able to install NetBuei protocol(for RAS). Do you
> think i should not have problem browsing network resources
> even if i do not have NetBuei installed on these clients?.
> Same problem i have on Windows 2000 professional & Windows
> 98 clients if I remove the NetBuei protocol...
>
> -----Original Message-----
> Are you able to go out of your Notebooks? Are you able to
> ping any machines outside of your notebook?
> If not, then I guess your default gateway is not properly
> set.
>
> On the connectoid which you use to RAS in, properties-
> Networking-
> TCP/IP->Properties->Advanced- Check " Use the default
> gateway on remote computer" so you will be to go to
> any resources on the remote network once you are
> connected.
>
> - Manjari
> ------------------------------------------------------
> Dear RAS experts,
>
> I hope someone can help me with this problem...
>
> We have RAS running on windows 2000 server. It has been
> more than 2 years since we have been using this box as
> RAS server without any problem. The client computers have
> windows 2000 professional & windows 98. Remote users use
> RAS for connecting to the network for accessing files
> located on the file servers & emails(through Microsoft
> Outlook). We have file servers & exchange servers located
> on different boxes than the RAS server. Even then, windows
> 2000 & 98 clients do not have problem accessing this.
> Both NetBeui & TCP/IP protocols have been installed on
> client computers. FYI, file servers, RAS server & exchange
> servers have static private IP's (10.10.10.x) assigned
> to their network card. DHCP is also running.
>
> Now the problem. Recently we purchased 2 notebooks
> running Windows XP professional. As most of you know,
> NetBeui protocal can not be installed on XP professional
> for RAS. Though i am able to connect to RAS servers from
> Windows XP clients(authentication goes through just fine),
> I am not able to browse network or open microsoft Outlook
> for emails... Since NetBeui protocol could not be
> installed on XP for RAS, i think this is causing the
> problem. IS THERE A SOLUTION?? Please kindly help!
>
> Thanks
> Victor


Relevant Pages

  • Please help...
    ... am not able to install NetBuei protocol. ... even if i do not have NetBuei installed on these clients?. ... On the connectoid which you use to RAS in, ... We have file servers & exchange servers located ...
    (microsoft.public.win2000.ras_routing)
  • Re: failed admin pak installation - w2k3
    ... The Windows Installer service cannot update one or more protected Windows ... Jabez stated: "Disable Windows File Protection." ... I can install this admin pak in my test environment w/o any issue. ... our production servers and the installation fails with "Windows File ...
    (microsoft.public.windows.server.setup)
  • Multiple problems with Win2003 SP2
    ... servers servers running Win2003 R2, but on a further two 32-bit member ... reboot = No, reboot required = No ... Content Install Installation Failure: Windows failed to install the ...
    (microsoft.public.windows.server.general)
  • Re: Multiple problems with Win2003 SP2
    ... servers servers running Win2003 R2, but on a further two 32-bit member ... reboot = No, reboot required = No ... Content Install Installation Failure: Windows failed to install the ...
    (microsoft.public.windows.server.general)
  • Re: RAS on XP
    ... am not able to install NetBuei protocol(for RAS). ... even if i do not have NetBuei installed on these clients?. ... Same problem i have on Windows 2000 professional & Windows ...
    (microsoft.public.win2000.ras_routing)