Re: Problem Mapping Drives...

From: Pegasus \(MVP\) (I.can_at_fly.com)
Date: 03/07/04

  • Next message: Bill Grant: "Re: RAS Configuration Question" 
    Date: Sun, 7 Mar 2004 13:01:31 +1100

    This is the setting that solved the problem on all of my
    installations. If it does not solve it on yours then you
    may have to start digging yourself. Maybe other posters
    have further suggestions.

    "John" <john@takenet.com> wrote in message
    news:jkqj401uvb3brdhf7trjsgpjmmjan92gst@4ax.com...
    > I have checked the settings on the server...
    >
    > The path is slightly different:
    >
    > Computer Configuration / Windows Settings / Security Settings /
    > Local Policies / Security Options /
    >
    > Network Access is set to classic !!!
    >
    > Now what ??
    >
    > Thanks
    >
    > On Sat, 6 Mar 2004 07:50:48 +1100, "Pegasus \(MVP\)" <I.can@fly.com>
    wrote:
    >
    > >It's a local policy setting on Windows XP/2003. It took me six
    > >months and three newsgroup posts to resolve it when I first
    > >tripped over it . . .
    > >
    > >Run gpedit.msc and follow this path:
    > >Computer configuration / Windows Settings / Security Settings /
    > >Local Settings / Securit options / Network Access:
    > >Sharing and Security model for local accounts:
    > >Use "Classic" - local users authenticate as themselves.
    > >
    > >Problem solved.
    > >
    > >"John" <john@takenet.com> wrote in message
    > >news:650h40dm6gg0khsl6s0nrg3devfk26bhsn@4ax.com...
    > >> OK.. I've tried the following:
    > >>
    > >> The user I'm trying to map drives with is a member of:
    > >> Users
    > >> Domain Users
    > >>
    > >> C$ is shared with:
    > >> Administrators FULL RIGHTS
    > >> SYSTEM FULL RIGHTS
    > >> Users Read & Execute / List / Read
    > >>
    > >> TEMP$ is shared with:
    > >> Administrators FULL RIGHTS
    > >> SYSTEM FULL RIGHTS
    > >> Users Read & Execute / List / Read
    > >>
    > >> When trying to map to TEMP$ it works fine !!
    > >>
    > >> When trying to map to C$ it fails...
    > >>
    > >> Does this help ?
    > >>
    > >> On Fri, 5 Mar 2004 22:52:44 +1100, "Pegasus \(MVP\)" <I.can@fly.com>
    > >> wrote:
    > >>
    > >> >What happens when you connect to shares other then
    > >> >the administrative shares?
    > >> >
    > >> >
    > >> >"John" <john@takenet.com> wrote in message
    > >> >news:jvmg40h6rdvg3l37rv3o758fr540lueeq0@4ax.com...
    > >> >> Server 2003
    > >> >>
    > >> >> On my local LAN, I can Map a drive using:
    > >> >>
    > >> >> net use p: \\test\c$
    > >> >>
    > >> >> I get asked for the UserName & Password and it all works fine !
    > >> >>
    > >> >> When I VPN into my network, I can run VNC and see the network and it
    > >> >> all seems fine...
    > >> >>
    > >> >> HOWEVER... When I try and map a drive using:
    > >> >>
    > >> >> net use p: \\test\c$
    > >> >>
    > >> >> I get asked for the username and password, which I enter, but then I
    > >> >> get :
    > >> >>
    > >> >> System error 1326 has occurred.
    > >> >> Logon failure: unknown user name or bad password.
    > >> >>
    > >> >> The Username and password are fine.
    > >> >>
    > >> >> Any Ideas ??
    > >> >>
    > >> >>
    > >> >
    > >>
    > >
    >

  • Next message: Bill Grant: "Re: RAS Configuration Question"

    Relevant Pages

    • Re: Problem Mapping Drives...
      ... installations. ... > Network Access is set to classic!!! ... >>months and three newsgroup posts to resolve it when I first ...
      (microsoft.public.win2000.networking)
    • outlook and exchange sid-by-side
      ... I have the following issue with outlook and exhange ... the article goes on about side-by-side installations but does not explain ... Has anyone resolve this issue and can help me resolve it? ...
      (microsoft.public.windows.server.sbs)
    • Re: "ieframe.dll failed to register"
      ... is this on a system that had your project installed through a setup project? ... if so exclude ieframe.dll from your referenced dependancy list in the setup ... and installations have always gone fine. ... here and how should I resolve this? ...
      (microsoft.public.dotnet.languages.vb)
    • outlook and exhange sie-by-side on SBS
      ... I have the following issue with outlook and exhange ... the article goes on about side-by-side installations but does not explain ... Has anyone resolve this issue and can help me resolve it? ...
      (microsoft.public.outlook.installation)
    Loading