VPN connects but cannot browse network

Tech-Archive recommends: Fix windows errors by optimizing your registry

I have setup a Server 2008 with RRAS and the Routing services. This machine
has only a single NIC and is behind a NAT router and firewall. I have
forwarded port 1723 and GRE to the IP of the server.

My clients can sucessfully connect but they cannot access my network. I want
them to use the Sharepoint services which is on the same machine as the VPN
server.

I have my own DHCP and DNS cache located on another machine. I have setup
VPN to assign remote IP addresses from the DHCP. This does happen properly.
But users cannot browse my network nor access any of the webservers. The
network access just times out in IE according to my users.

What have I missed? NPS seems properly setup...connections are allowed. No
IP restrictions at all. Enable Router Manager is ticked on the Interface.
I've looked around everywhere I can for a couple of days now and can't see
what I've done wrong.

Wondering if I should use static routes instead. and create a separate pool
of IP address in another subnet? I'm not a networking expert either...this is
challenge for me.

VP server is:
IP 192.168.1.231
gateway 192.168.1.254 (router)
mask 255.255.0.0

I was thinking the pool will be 192.168.2.x
and setup static route as:
192.168.1.0 255.255.255.0 gateway 192.168.1.231

I'm not a networking expert and my user's don't know a thing about
computers...so I'm not getting much help either.

Any ideas what I've done wrong?

Sal.
.

Relevant Pages

  • RE: Securing a Local Network
    ... Show the Management of your company the insecurity of the Peer to Peer ... setup and discuss what risks are they willing to accept. ... -Cost of getting the web server and the mail server internally versus having ... -Use an older box for Intrusion Detection on the internal network as well. ...
    (Security-Basics)
  • ksoftirqd causing severe network performance problems
    ... failover setup), with a new one. ... At the end of last week, the new setup had network problems and what we saw on ... the linux router was that the kernel threads ksoftirqd_CPU1 and ksoftirqd_CPU0 ... When the backup is working fine, we can't use the faulty server anymore ...
    (Linux-Kernel)
  • RDP to internal client machine?
    ... Have the router successfully setup to allow VPN to the server, ... to then RDP to other computers within the network, ... machines within the network I ...
    (microsoft.public.windows.server.sbs)
  • ksoftirqd causing severe network performance problems
    ... failover setup), with a new one. ... At the end of last week, the new setup had network problems and what we ... When the backup is working fine, we can't use the faulty server ... switching drivers and switching between kernel versions (2.4.21/2.4.22/ ...
    (comp.os.linux.networking)
  • Re: Best way to connect via wireless in new SBS install?
    ... I have just setup someline very similar for a client of mine. ... and setup DHCP on the server. ... this means that all local internal network traffic ... I've seen so many posts suggesting using SBS ...
    (microsoft.public.windows.server.sbs)