Re: Home Networking Question: Bridging/IP Forwarding between 2 LAN segments

If subnet A machines have a default gateway of 192.168.15.1, they will not
be able to access the Internet via subnet B. You would have to give subnet
A machines the 192.168.15.x address of server 6 as a gateway; Delete the
192.168.15.1 gateway from server 6; Enable routing on server 6; And create
a static route back to 192.168.15.x on whatever is at 192.168.1.254.

Doug Sherman
MCSE, MCSA, MCP+I, MVP

"W2K Programmer" <w2k_programmer@xxxxxxxxx> wrote in message
news:1161803465.140553.104370@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Need help from experienced MS networking pros for step by step config
of network segment A and B.


1. Server 4, 5, and 6 make a LAN segment A using a router R (subnet
192.168.15.x/Gateway 192.168.15.1)

2. Server 6 is multihomed (dual LAN card). External Card is directly
connected to DSL modem/WAN forming segment B (subnet
192.168.1.x/gateway 192.168.1.254). Internal card is connected to
router R described in step 1.

Segement A and B by themselves are fine.

But I can't seem to succesfully bridge/IP forward between the two cards
in order for segment A to access the *internet/WAN* via segment B.
Please give *step by step intructions* for this required configuration.
Server 4,5 run windows 2000 Pro, server 6 runs XP Pro.

Help is appreciated. TIA.



.

Relevant Pages

  • RE: ISA 2004 Firewall Client and ActiveSync 4.2
    ... at home in my WLAN all internet ... that killing my default gateway is not the way ... gateway and the appropriate DNS server entries. ... server internal IP then your client works as a secureNAT client and you're ...
    (microsoft.public.isa.clients)
  • Re: Single 2003 Server with DHCP, DNS and ISA 2006
    ... As soon as I created my own DHCP ... I can ping the server by IP address and name from the workstation. ... Not too surprising with the above subnet problems. ... To the Internet. ...
    (microsoft.public.windows.server.general)
  • Re: Help needed with intermittent internet
    ... cable internet service. ... The second NIC in the server is for the LAN, ... Occasionally I can get a response from the gateway, ... This fact led Comcast to conclude pretty early on that the ...
    (comp.dcom.modems.cable)
  • Re: Windows Time Service woes!!
    ... My internal DC FSMO is: ... My Internet gateway router (Win2K3 member server running a network firewall) ... my Internet router as a gateway) to time.nist.gov. ...
    (microsoft.public.windows.server.networking)
  • Re: New User on Wireless Setup (continued)
    ... with the gateway on the second pointing to the first so the cable internet works on both..... ... easy to do the two wap/routers to isolate the subnets, trick was the gateway so the second subnet users could use the internet, but not see anything shared on the other subnet ... wap router 1 ssid PPinUSA DHPC server on, cable modem, starting ip ...
    (alt.internet.wireless)