Re: dymanic route table problem

I agree 100% with Phillip. If it only happens in segments where the default
gateway is pointed at the PIX, the PIX is responsible - it may not be doing
anything wrong based on it's configuration - but it is almost surely the
source of the information. Windows will not learn routes from another
router's routing table (unless a routing protocol is running on both), but
it will learn direct routes to hosts via an ip redirect.

...kurt

"Phillip Windell" <@.> wrote in message
news:ujF3nCq3GHA.5092@xxxxxxxxxxxxxxxxxxxxxxx
"Brian E" <dirwolf@xxxxxxxxxxxxx> wrote in message
news:Ot6dq7d3GHA.4748@xxxxxxxxxxxxxxxxxxxxxxx
Would you happen to have any references on how 2000/2003 discovers routes
on boot,

I'm not aware that such a mechanism even exists,...in fact I don't think
such a thing does exist. The routing table is built at bootime based on
the TCP/IP config of the Interfaces, so it is effectively *static* and not
"learned", which is why I asked earlier if there were additional IP#s
configured that might have been forgotten about.

You need to be looking at the PIX and any other router that "touches" that
segment. If you don't have access to those things, find someone who does
and dump this in their lap.

I have a feeling this is something learned, something like spanning tree.

Spanning Tree is Layer2 and only effects the Switch Fabric. In the end
all it really does is detect rudundant Switch Pathes and shuts down the
slower one and holds it in reserve in case the primary one goes
down,...then it brings up the reservered one. That is all it does,..it is
Layer2 and only functions within a single subnet. Routing Tables in the
OS are Layer3, so there is really no relationship at all,..they aren't
even aware of each other.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com




.

Relevant Pages

  • Re: VPN Design - is it possible?
    ... > And the PIX can actively partake in which routing protocols? ... provides resilience for the internet access only. ...
    (comp.dcom.sys.cisco)
  • Re: dymanic route table problem
    ... The redirect has been mentioned by another person as well and that is surely what it seems like it is happening. ... gateway is pointed at the PIX, the PIX is responsible - it may not be doing ... router's routing table, ... it will learn direct routes to hosts via an ip redirect. ...
    (microsoft.public.win2000.networking)
  • Re: two default gataways
    ... Can any one help how to configure routing on PIX ... If there is a WAN router, then the WAN router could send two default ... lot of experience into writing up the hidden problems with redundant ... The PIX model was not mentioned, ...
    (comp.dcom.sys.cisco)
  • Re: Client Machine cannot see Active Directory
    ... > The pix VPN allows all traffic between 1.0 and 0.0 ... This will cause routing errors on the ... As for the PIX routing between two private subnets, I've seen issues, and ... back to the DNS errors. ...
    (microsoft.public.win2000.active_directory)
  • Re: I cant make ISA 2004 let me access the Internet
    ... I think it is the PIX blocking traffic, since in the ISA logging, it appears ... > Phillip Windell ...
    (microsoft.public.isa)