Re: dymanic route table problem

Brian, maybe one of the routers is sending redirects. That will usually
happen with an incorrect subnet mask, where the subnet mask of the router
interface is different than that of the workstation.

....kurt



"Brian E" <dirwolf@xxxxxxxxxxxxx> wrote in message
news:eguDtbQ3GHA.4748@xxxxxxxxxxxxxxxxxxxxxxx
Phillip
I do appreciate your help, however, I have gone over all of that on the
system.
There are no other network devices on these systems.
There are no routing protocols being broadcasted by the pix firewall,
this was verified by the network team today, it is all static entries, no
route learning by the device, that kind of control is needed.
There are no virtual adapters or modems.
there are no extra ip addresses or gateways.
To even complicate this I have found that 20 different systems that
live on this one vlan with this pix firewall all have at least one entry
in the route table that should not be there.
So, the basic question is how the OS truly adds an ip route to the
table when it has no interface to that subnet.
This is also an enterprise class network, it is not a workgroup with
hubs.
thanks,

"Phillip Windell" <@.> wrote in message
news:%232aLAEQ3GHA.3944@xxxxxxxxxxxxxxxxxxxxxxx
(Please switch to "plain text" format)

The routing table may also do that if you have addional IP#s assigned to
Nics in the Advanced section of the TCP/IP Propterties that you may have
forgotten are there.

Virtual Adapters like modems, VPN, and some other types will also create
entries in the table for themselves. Anything that shows up as an Adapter
when you run "IPConfig /All" can potentially do this.

Routing Protocols exchange routing tables between devices,...you can not
get
a route dynamically unless there is another device on the LAN with a
routing
table that it wants to "pass on",...the routing protocols do not create
that
stuff on their own. Enabling routing protocols on a single device sitting
on the LAN by itself will not produce anything.

So,...whatever route you think you are getting will,...itself,...be the
key
to where it is getting it.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com

"Brian E" <dirwolf@xxxxxxxxxxxxx> wrote in message
news:OKmPqSO3GHA.480@xxxxxxxxxxxxxxxxxxxxxxx
Okay, do you have any suggestions?
Because everything I see is that it is dynamic. If I delete one of those
routes it comes right back, and the other two will follow close behind.

"Phillip Windell" <@.> wrote in message
news:uwMA7%23N3GHA.4920@xxxxxxxxxxxxxxxxxxxxxxx
My question is how in the world does 2000 dymanically learn routes
without
running a
routing protocal?

It won't. You need to re-examine what you are looking at.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com



.

Relevant Pages

  • Re: dymanic route table problem
    ... Hmm, I have posed that question to the network admin, dont have access to the pix. ... Ethernet adapter Backup1: ... This morning there is only the 198.182.130.120 entry that has no business in the route table, I am sure the other routes will show up as the day progresses. ... > Routing Protocols exchange routing tables between devices,...you can not ...
    (microsoft.public.win2000.networking)
  • Re: dymanic route table problem
    ... There are no other network devices on these systems. ... route learning by the device, that kind of control is needed. ... Virtual Adapters like modems, VPN, and some other types will also create ... Routing Protocols exchange routing tables between devices,...you can not get ...
    (microsoft.public.win2000.networking)
  • Re: Troubleshooting IP routing protocols
    ... I would like to know about troubleshooting IP routing protocols in ... general and RIP in particular. ... Some info on troubleshooting techniques would help. ... A route flap can often come from an interface flap which then makes ...
    (comp.dcom.sys.cisco)
  • Re: Dual Gateways
    ... >>>gateway or do a route add command. ... AFAIK simply having two routes doesn't load balances ... I just need the DHCP scripts to add the UG of BOTH ISPs ... there are routing protocols designed ...
    (Fedora)
Loading