Re: connect 2 lan to access internet through dlink g604t modem router
- From: "Gerard" <wing_tai_ip@xxxxxxxxxxxxxx>
- Date: 15 Aug 2006 15:30:13 -0700
Kurt wrote:
But if you really want to do it that way, you can just use ICS as before.
Enable ICS on the ADSL interface. Windows will wan to change the LAN
interface to 192.168.0.1. I'd just let it do that, but if you want or need
it to be on the 10.1.2.0/24 network, just change it back after ICS ins
enabled. If you leave it 192.168.0.1 you'll also get DHCP service so you can
just set the computer on the other end of the crossover cable to obtain it's
IP and DNS settings automatically.
That's really all there is to it.
...kurt
Thanks for the reply.
I use the crossover cable and one wireless adapter because the two pc
are in the same room which is quite far away from the access point (the
phone plug and the G604T) and I don't want to buy another wireless
adaptor or run the cable on the floor.
I will try the ICS option later tonight when I go back home and update
the group later.
Thanks
Gerard
.
- Follow-Ups:
- References:
- Prev by Date: Re: no logon server available
- Next by Date: Re: no logon server available
- Previous by thread: Re: connect 2 lan to access internet through dlink g604t modem router
- Next by thread: Re: connect 2 lan to access internet through dlink g604t modem router
- Index(es):
Relevant Pages
|
Loading
