Re: Change the default IP in ICS
- From: "Kurt" <lorentzenkurt@xxxxxxxxxxxxxxxxxx>
- Date: Wed, 7 Dec 2005 19:47:50 -0800
Just change it in TCP/IP properties. It works just fine, but you WILL have
to assign your other ICS client's IP settings manually, as the DHCP server
only works with the default 192.168.0 settings. (I ran my home Internet for
years with that setup).
....kurt
"Techmanblues" <Techmanblues@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4A27A4B5-4968-4869-B1F8-C84A47BF54BB@xxxxxxxxxxxxxxxx
> How? I cannot find it anywhere online.
>
> "Robert L [MS-MVP]" wrote:
>
>> You may, but it is not recommended.
>>
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>> "Techmanblues" <Techmanblues@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
>> message news:96D068D5-CE88-4108-BF6F-0818E36C3250@xxxxxxxxxxxxxxxx
>> When I configure Internet Conection Sharing in Windows 2000
>> Professional, the
>> NIC card that acts as the "WAN" in the setup is automatically get the
>> IP
>> address of 192.168.0.1 and then Win2k uses the other NIC as the "LAN"
>> side of
>> the connection. My question is can I tell W2K NOT to use the default
>> 192.168.0.1, but something like 192.168.1.1 or even 192.168.0
.
- Follow-Ups:
- Re: Change the default IP in ICS
- From: Michel Merlin
- Re: Change the default IP in ICS
- Prev by Date: Re: Need network access but not internet access
- Next by Date: Re: Adding a second domain.
- Previous by thread: Re: Can't save password on Win2k share from XP Home - ids/pws match
- Next by thread: Re: Change the default IP in ICS
- Index(es):
Relevant Pages
|
