Re: Win2k server network bridge

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

you would need to different subnets (192.168.1.x is one? or are you using a
smal subnet mask?)
your question doesnt realy explain what you are trying to do, if you dont
need nat or routing, you are basicly just setting up to NICs with two
different ip adresses on seperate subnets, no traffic will move between
them.

otherwise you need routing, and to install RRAS

--
Regards Sole Viktor, MCSE
sole(a)sole.dk

"Darek V" <DarekV@xxxxxxxxxxxxxxxxxxxxxxxxx> skrev i en meddelelse
news:933954B6-7610-45B7-BB77-55BAFC897907@xxxxxxxxxxxxxxxx
> How do you bridge 2 NIC cards in a Windows 2000 server?
>
> I know it's simple to do with XP or Server 2003, but I haven't been able
> to
> find anything on how to setup a simple bridge under Server 2000.
>
> I don't need to setup any routing or NAT services, I just need to connect
> 2
> subnets under 192.168.1.x so I can setup some network monitoring and
> bandwidth management services.
>
> - Darek


.

Relevant Pages

  • Re: Microsoft VPN Issue (Need Help)
    ... or post the routing table in the RRAS may help. ... Clients can connect externally with no problems and can ping, ... I have 5 domains and all are on different subnets 172.16.x.x 172.17.x.x ... How can i configure this server to enable them to ping and access the ...
    (microsoft.public.windows.server.networking)
  • Re: use windows2003 as router
    ... I need to connect 2 subnets in a non-productive environment (i.e ... a dedicated routing device would be too expensive so I would like to use a ... Especially when the server does additional tasks, ... I would like to use a windows2003 server with 2 network interfaces and ...
    (microsoft.public.windows.server.general)
  • Re: [SLE] Two NICs
    ... >> I'm trying to setup two NICs on one box, and seem to be having trouble ... > different subnets, to provide separation of internal and external traffic. ... but there should be no difference between single machine use ... > working as a standalone internet setup on the one machine. ...
    (SuSE)
  • Re: Seriously confused about linux routing
    ... Server 1: ... The VPN is connecting the computers via the 192. ... So far, for the routing tables, on Server 1: ... computers on the other subnets, however, I'm having problems with the ...
    (comp.os.linux.networking)
  • Re: Vpn Server IP same as Client
    ... These NICs on your VPN work server need to be on different subnets in order ... Todd J Heron, MCSE ... Windows Server 2003/2000/NT; CCA ... I did notice that the static routing table on the work machine is blank ...
    (microsoft.public.windows.server.networking)