Re: 2 Nics - one to internet one to VPN

> No. You are doing two things wrong at the same time.
>
> 1. One Nic per subnet (except for Nic Teaming situations)
> 2. On default gateway per whole machine.
>
> Use *one* Nic. Static Routes in the Routing Table determine the right path
> for the VPN Traffic.

I still don't understand how to accomplish this... maybe this diagram will
help.

Local Machine
| |
NIC#1 NIC#2
(192.168.1.25 (192.168.1.40
GTW: 192.168.1.1) GWY: 192.168.1.20)
| |
PIX FIREWALL VPN Router to Client
(192.168.1.1) (192.168.1.20)
| |
Internet Client Site
.

Relevant Pages

  • Re: IP Config with 2 NICs Wizard dont work, Static dont work!
    ... As SG and Owen pointed out, your internal external NICs MUST be in different ... subnet if your physical setup is per the diagram at:. ... the easiest to change is the external subnet. ... follow the diagram above and use the wizards. ...
    (microsoft.public.windows.server.sbs)
  • Re: How to set a static IP??
    ... address of 192.168.1.51 would be the second one in the DHCP range and ... Yep, while an example, if he used that one would plonk his machine on a ... totally different subnet. ... Prev by Date: ...
    (alt.internet.wireless)
  • Subnet or master browser issue?
    ... master browser or the way my subnet is setup? ... Prev by Date: ...
    (microsoft.public.windows.server.setup)
  • Re: AD RPC replication over NAT, possible?
    ... can make it part of the existing site (associate the new subnet with the ... just replication --traffic localisation is nice, ... Paul Williams ... Prev by Date: ...
    (microsoft.public.windows.server.active_directory)
  • Re: Unable to install agents on new subnet
    ... I see that the network discovery has already ran but still the ... client is not able to get the clients installed since the new subnet is ... not listed as part of the allowed boundaries EVEN though I have added ... Prev by Date: ...
    (microsoft.public.sms.admin)