Keep routing table

Hi as requested in a previous post, i've a multi-homed server with 3 public
lan and 1 private nic.

I've found a routing table that work fine but it never remain after restart.
The routing table work executing 2 command that delete the route (but i
suppose that there some problems) of range for 2 nics.

There's a way to set as persistant this configuration?

Thanks in advance.

Massimo Artini


.

Relevant Pages

  • Re: Eth0 and eth1
    ... The routing table in a *nix machine deals with "outbound" packets. ... The one that is straddling your LAN and your IP connection? ... >> up two network cards under Linux in the arrangement I've described? ... LAN computers address your gateway computer directly, ...
    (comp.os.linux.networking)
  • Re: VPN connection works, lan access fails
    ... I agree with your routing assessment though I had found a lot of MS ... I considered there may be a need to forward packets from the PPTP daemon ... From the inside LAN I can ping the SBS static IP, ... > "real" routing going on because they are all in the same IP subnet. ...
    (microsoft.public.win2000.ras_routing)
  • Re: RH Fedora as my gateway
    ... Turn off the FW till you get LAN connected properly. ... RH gw or the gw listed in route table? ... Commands used to set up the FW? ... You have nets set up in routing table but what _interface_ is ...
    (comp.os.linux.networking)
  • Re: New to RRAS for Routing
    ... I am new to Networking and Routing. ... the RRAS Router already connected to different LAN ... do you mean the Internet Sharing Device = Proxy Server ...
    (microsoft.public.windows.server.networking)
  • Re: "Routing and Remote Access" in Windows Server 2003
    ... Additionally I tell you that I have read a lot of documents on Internet, ... to the LAN the IP 192.168.1.1. ... In "Routing and Remote Access" I have added both NICS. ... >> automatic DNS and no gateway ...
    (microsoft.public.win2000.ras_routing)