Re: Two Defulat gateways.


the problem the local network card doesn't know the isp1 is down, so it still route to the isp1.
For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

I recommend Brinkster for web hosting!

Hi,
I have 2 ISP and 2 firewalls and 2 default gatways and windows 2000 server.
When I testing internet connectivity by turnoff ISP 1 and so my default
gateway 1 is not switching gateway 2 and I can not browse internetnet. If I
manully my up gateway 2 then I can browse internet. Why I have to do this
manully? Even though I try to set metric 1 for gateway 1 and 2 for gateway 2
but still didn't work.
need help

Thanks

Relevant Pages

  • Re: Non-domain connection problem
    ... Yesterday I even hardcoded the DNS of a local ISP into the TCP/ip properties ... Connect to Internet from Internal Network ... Notice that the default gateway and DNS IP addresses are different, ...
    (microsoft.public.windows.server.sbs)
  • Re: Problem configuring NAT to share Internet Connection
    ... Posting on MS newsgroup will benefit all readers and you may get more help. ... How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com ... Internet protocol is Router V3 ... > finally I have 3 network connections, 2 corresponding with NIC A and NIC B ...
    (microsoft.public.win2000.ras_routing)
  • Re: Possible case of ip forwarding
    ... I have a desktop running windows and a laptop running FC6. ... Laptop is able to access internet without any issues. ... I changed my desktop's default default gateway to be my ... Laptop's gateway is the default gateway of the network. ...
    (Fedora)
  • Re: One computer on 2 networks
    ... The gateway setting on the 172.30 NIC should be blank. ... If they are not all 172.30 you need to use a shorter network mask (so ... How exactly would the Route Add sentence be? ... and yours must point to the Internet gateway. ...
    (microsoft.public.windows.server.networking)
  • Re: DSL Network Connection with a Switch
    ... > From what I can gather, from what you are saying, I most likely should set> each of the other computers IP address and gateway. ... >> Either you set it manually under Internet Protocol and properties>> or it gets it's IP address from a DHCP server. ... >> It's necessary that it can handle NAT (Network Address Translation). ... >> towards your local network. ...
    (microsoft.public.windowsxp.newusers)