Re: Adding a route question

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Hi Sam,

> ETHERNET ADAPTER 1
> IP address 192.168.1.1
> Subnet mask 255.255.255.0
> Gateway 192.168.2.1
>
> ETHERNET ADAPTER 2
> IP address 192.168.2.1
> Subnet mask 255.255.255.192
> Gateway 192.168.1.1

your ip address & gateway address is not match! pls chek?

Regards,

John
"Robert L [MS-MVP]" wrote:

> if you have enabled the IP routing, it should create router for you and you don't need to do it. posting the routing table will help. or visit this page, http://www.chicagotech.net/routing.htm
>
> Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.
>
> Bob Lin, MS-MVP, MCSE & CNE
> How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> This posting is provided "AS IS" with no warranties.
> I recommend Brinkster for web hosting!
>
> "Sam" <Sam@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:5DD30B58-840B-4BD3-B03C-853CDEE12C00@xxxxxxxxxxxxxxxx
> Hi,
>
> I am in the process of setting up a routed network. One network is
> 192.168.1.0/24 and the other is 192.168.2.0/26. I have configured a windows
> 2000 router with 2 network cards to each represent the networks. However
> when I try to use the “route add –p” command to add a persistent route to the
> networks I get an interface error message. Can someone show me what the
> command would be if my network cards are configured the following way?
>
> ETHERNET ADAPTER 1
> IP address 192.168.1.1
> Subnet mask 255.255.255.0
> Gateway 192.168.2.1
>
> ETHERNET ADAPTER 2
> IP address 192.168.2.1
> Subnet mask 255.255.255.192
> Gateway 192.168.1.1
>
> Regards
> Sam
.

Relevant Pages

  • Re: TCPIP Profile (GATEWAY vs BEGIN/ENDROUTES)
    ... GATEWAY is the old, old way of doing it, the understanding of which was some ... Thus the network is 10, ... says and 1500 is good for one of the Ethernet flavours, Subnet Mask is ... TCPIP Profile ...
    (bit.listserv.ibm-main)
  • Re: How to connect to network share on CE 4.2
    ... Subnet mask and gateway correctly but on our ... When I try to connect ot a server with the IP: ... you can definitely ping the server, etc., the usual network diagnostic ...
    (microsoft.public.windowsce.app.development)
  • Re: Event Error 32003 IPNATHLP & KB 293497
    ... Mark, Thank you so very much for your Help. ... Your computer has automatically configured the IP address for the Network ... SIEMANS Speedstream 6520 Wireless ADSL Gateway. ... KB 293497 says to change the Mask to the Subnet Mask that the External ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Adding a route question
    ... Do I have my network cards gateways configured correctly? ... Subnet mask 255.255.255.0 ... With one router it is ... > gateway" so no static routes need to be manually ADDED. ...
    (microsoft.public.win2000.networking)
  • One NIC and Warning - Multiple default gateways error message
    ... a few days ago I have modified my network and needed to change the ... IP and gateway on my ethernet adapter on my win2k system. ... Here's some results I get with ipconfig and route: ...
    (microsoft.public.win2000.networking)