Re: IP ADDRESS CHANGE ISSUES / QUESTION -Multiple IP Addresses on PDC

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Phillip Windell (_at_.)
Date: 10/22/04 

Date: Fri, 22 Oct 2004 08:42:32 -0500

1. Build the new "network" just as if you were simply adding a new subnet.
2. Yes, you will need to "route" between them.
3. Yes, you will have endless amounts of trouble the way you are attempting
it (if it even works at all)
4. Move the machines over to the new network, while the routing will cover
the ones that haven't been moved yet.
5. When there are no machines left in the old network, eliminate it.

A. Multiple IP#s on same NIC = All IP#s must be in same subnet
B. Single IP# on multiple NICs = Each NIC must be in a different subnet
C. Only special "teaming Nics" should be run with multiple NICs in the same
subnet. 

-- 
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com

Relevant Pages

  • Re: Event ID 1000 (Userenv) Error and Event ID 8021 (BROWSER) Error
    ... > destination route entry with the 192.168.0.1 GWY was higher priority, ... > the external network), and from there to the open Internet. ... > An additional item is that it appears that if any of the NICs in the ... > with destination addresses on the 192.168.1 subnet to get to the ...
    (microsoft.public.win2000.dns)
  • Re: Event ID 1000 (Userenv) Error and Event ID 8021 (BROWSER) Error
    ... > destination route entry with the 192.168.0.1 GWY was higher priority, ... > the external network), and from there to the open Internet. ... > An additional item is that it appears that if any of the NICs in the ... > with destination addresses on the 192.168.1 subnet to get to the ...
    (microsoft.public.win2000.networking)
  • Re: Default Gateway Reverts to Old Setting
    ... This server is on the only IP subnet at the client's main office. ... The server has two identical 10/100/1000 NICs, ... TCP/IP is the only network protocol installed. ...
    (microsoft.public.windows.server.networking)
  • Re: Using multiple network cards and IP addresses in one machine
    ... I would remove all the network cards but one and use either DNS ... aliases or IIS virtual web sites to handle the multiple site issues. ... What I've got is a web server behind ISA 2004 and that server has two NICs ... the same subnet - each is for a different site. ...
    (microsoft.public.win2000.networking)
  • Re: Internal external ipaddys same subnet
    ... be your case since both your interfaces are part of the same subnet. ... >>> network, problem is both nics are on the same address range, does this ...
    (microsoft.public.isa)