Re: multihomed dhcp server assigns incorrect ip

From: Phillip Windell (_at_.)
Date: 08/10/04 

Date: Tue, 10 Aug 2004 11:59:28 -0500

Is it a laptop? Did they shut it off before moving it or did they just leave
it run or let it hibernate? It needs to be shut off before moving, then
powered back up. 

-- 
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
"shank" <anonymous@discussions.microsoft.com> wrote in message
news:38e401c47eef$31a02980$a601280a@phx.gbl...
> I have a multihomed dhcp server and it works fine for
> most situations. I have a problem when a client moves
> from one subnet to another on the same dhcp server. DHCP
> server assigns the ip address from the 1st subnet and now
> the client being in the 2nd subnet cannot communicate.
>
> I do not understand why the dhcp server does not delete
> the old lease for the client and assign a new one for the
> new subnet
>
> Any ideas?

Relevant Pages

  • Re: Troubles with DHCP when using wireless access
    ... You need to configure BOOTP/client on the router giving the ... IP Helper (or DHCP server) address as 192.168.1.10 ... > connecting to a subnet with IPs in the 192.168.1.xxx range. ...
    (microsoft.public.windows.server.networking)
  • Re: xp not detecting correct dhcp address
    ... I changed the subnet on the router to 255.255.255.0. ... only if the client decides there is no DHCP server. ... Sometimes the driver just leaves the ... I still think you've got something misconfigured on the client, ...
    (alt.internet.wireless)
  • multihomed dhcp server assigns incorrect ip
    ... I have a multihomed dhcp server and it works fine for ... from one subnet to another on the same dhcp server. ... the client being in the 2nd subnet cannot communicate. ...
    (microsoft.public.win2000.networking)
  • Re: Scope wont release addresses
    ... > I have a scope on a DHCP server that servers my clients on ... Each scope is to be a different subnet, ... router must also be setup to forward DHCP Queries to the DHCP Server. ... that the client in the proper subnet receives the proper address from the ...
    (microsoft.public.win2000.networking)
  • Re: Changing IP address on the primary site server (which also is a DC)
    ... if it's a client now and you move it to a different ... you could add the new subnet to the ... boundaries and let them appear in the CAPs before moving the site server so ... If you're just moving it to a different ...
    (microsoft.public.sms.admin)