DHCP for 2 netwoks

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Subbu (anonymous_at_discussions.microsoft.com)
Date: 05/18/04 

Date: Tue, 18 May 2004 16:16:49 -0700

I have two networks
Network A and Network B seperated with router
I am planning to keep DHCP server in network A and
planning to keep DHCP relay agent in network B
I am planning to set two scopes Scope A and Scope B

How I have to configure the DHCP to
1) Network A clients should get IP only from scope A
2) Network B clients should get IP only from scope B

Relevant Pages

  • Re: running out of IP Address! help!
    ... The beauty of DHCP is that you can reconfigure the scope and reboot everyone ... Since you have .0 for a network and you need connectivity to .1 you can't ... You also could just segment your network a little. ...
    (microsoft.public.win2000.networking)
  • Re: DHCP Range
    ... If I change the NIC card details to 255.255.255.0, ... suggested (think i'll have to delete the existing DHCP scope to do this), ... details because the other network needs to be left alone. ... One thing i messd with is creating a superscope that includes a scope ...
    (microsoft.public.windows.server.setup)
  • Re: Change DHCP IP Adress
    ... What I am saying is that the Router needs to be on the same network as the ... scope. ... It really will depend on your network setup. ... >>> We recently switched our ISP and am trying to configure our DHCP ...
    (microsoft.public.win2000.networking)
  • Re: Changing corprate network addressing
    ... I have the original scope setup in my DHCP server. ... B network and bring them into Site A network and change the subnet mask to 255.255.255.0. ... Create a new Scope on the DHCP Server and configure the DHCP Helper Address on the LAN Router so it will forward the DHCP queries. ... Usually as simple as moving a patch cable in the MDF/IDF to another switch port on the other subnet. ...
    (microsoft.public.windows.server.networking)
  • Assign DHCP scope per interface
    ... Is it possible to assign a DHCP scope per network interface? ... I have a multihomed ISA 2004 with 4 NICs each one connecting to a different ...
    (microsoft.public.windows.server.networking)