Re: connecting two different networks

From: Altria (urbantec92_at_msn.com)
Date: 05/12/04


Date: Wed, 12 May 2004 11:32:55 -0400

Hello Phillip,
Thanks for the quick response....
When you say interfaces, do u mean an interface (network interface?) for
each corresponding subnet. In the router do you add a route ip entry for all
the corresponding subnets and allow the arp table to be rebuilt?
Suppose there are routers already separating each of the different networks
is there a way that i can add each ip/subnet entry into it and allow the
router to forward packets to the appropriate destination?
How exactly would this be accomplished?
TIA,
Altria
"Phillip Windell" <@.> wrote in message
news:ugeKaRDOEHA.540@TK2MSFTNGP11.phx.gbl...
> I can't tell you how to do it with fake numbers. The numbers you use
> actually make a difference in how it is done. Yes, you must use a Router.
> With three networks you need either two routers with two interfaces in
each
> or with one router that has three or more interfaces.
>
> --
>
> Phillip Windell [MCP, MVP, CCNA]
> www.wandtv.com
>
>
> "Altria" <urbantec92@msn.com> wrote in message
> news:ux7spADOEHA.3452@TK2MSFTNGP10.phx.gbl...
> > Hello All,
> > This may be a silly question but how do I connect multiple networks that
> do
> > not have a common network IDs. Is this done thru the subnet mask? For
> > example, how would i share resources in networks such as;
> >
> > A)111.222.0.0
> > B)222.0.0.0
> > C)333.1.20.0
> >
> > I am sure that a router is involved but do I simply have to give them
the
> > same subnet mask?
> > TIA
> > Altria
> >
> >
>
>



Relevant Pages

  • Re: Increase Addresses
    ... Maybe he has to have a subnet larger than a /24 ... > Microsoft Internet Security & Acceleration Server: ... Do I need to change my mask on the router to? ... networks. ...
    (microsoft.public.windows.server.networking)
  • Re: 1 Router 4 Class C Network Segments?
    ... > Would this be 4 Class C networks under one router? ... You have to use the same /22 subnet as your first configuration, ... you will need a router with at least 4 interfaces or 4 ...
    (microsoft.public.windows.server.networking)
  • Re: Connecting diferent networks
    ... The important thing is that the router has an interface in each network and IP routing is enabled. ... If the target machine is in the same IP subnet as the sender, the data is sent directly. ... you are saying that I can get an IP Router, for example and setup it with one IP address from one of the networks and then connect the switches to the router and setup the pcs gateways from both networks to the IP that I had gived to the router. ... I have one domain with a network with the PCs with fixed IP 193.1.1.1-254. ...
    (microsoft.public.windows.server.networking)
  • Re: Connecting diferent networks
    ... If they are on different switches, you need a router to connect the two ... The device you use as the router doesn't really matter. ... If the target is not in the same IP subnet, ... and setup it with one IP address from one of the networks and then connect ...
    (microsoft.public.windows.server.networking)
  • Yes, a quick routing question...
    ... I plug 2 interfaces on each to the other router, ... a route to the non-local subnet is added to each of the 2 ... Will the kernel load balance the traffic traveling between the 2 ...
    (freebsd-questions)