Re: Routing Between 2 Segments of Networks.

From: Phillip Windell (_at_.)
Date: 05/04/04 

Date: Tue, 4 May 2004 10:28:47 -0500

RIP is useless with only one Router and only route to any destination. RIP
is need when there are multiple routers with multiple redundant paths to the
same place. RIP helps decide which of the redundnat paths is the best one to
take. 

-- 
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
"Sebastjan Kocelj, Avtenta.SI" <Sebastjan.Kocelj@Avtenta.SI.si> wrote in
message news:ujlDDhdMEHA.2592@tk2msftngp13.phx.gbl...
> Hi, Vikrant
>
> I think you could do that with RIP protocol.
> http://support.microsoft.com/default.aspx?scid=kb;EN-US;241545
>
> -- 
> Best Regards,
> Sebastjan Kocelj, MCSA
> Avtenta.SI
> Microsoft Gold Certified Partner
> for Support Services
>
> "Vikrant" <anonymous@discussions.microsoft.com> wrote in message
> news:811101c431d4$0aa50070$a101280a@phx.gbl...
> > Hi,
> > I have 2 networks. 192.168.0.0 and 10.0.0.0 segments.
> > How do i accompolish routing between the two with a single
> > windows 2000 server configured as a router.
> > Want a host in 192 segment to talk to another host  in 10
> > segment.
> > I am able to ping to the router interface of 192 segment
> > from my 10 segment host.
> > Can anyone help in this?
> > Regards
> > Vikrant
> >
>
>

Relevant Pages

  • Re: Network/Portmapper problems
    ... >>What does the router table look like? ... Disableing multicast network 224 will not hurt the current ... My guessis that it's caused by the RIP ... >>daemon running and changeing the default route to something ...
    (comp.unix.sco.misc)
  • Re: Advanced Linksys routing question...
    ... Yes, it could be done using RIP, but RIP isn't the greatest routing ... If it is possible for you to get the other router, ... > to the internet when one of my ISP's goes down? ... >>RIP is meant to be an internal routing protocol, ...
    (comp.security.firewalls)
  • Re: What provides default router via DHCP?
    ... >> same thing can be done better using RIP. ... I'd also note that IPv6 has a similar router discovery mechanism. ... protocol and without substantial changes. ... if you run DHCP as a client on Solaris and the DHCP ...
    (comp.unix.admin)
  • Re: problems with the hello to eigrp
    ... The reoute send all times, hellos eigrp, I try disable the hello ... access-list 171 deny udp any any eq rip ... router cisco y nortel cisco. ...
    (comp.dcom.sys.cisco)
  • Re: problems with the hello to eigrp
    ... The reoute send all times, hellos eigrp, I try disable the hello ... access-list 171 deny udp any any eq rip ... router cisco y nortel cisco. ...
    (comp.dcom.sys.cisco)
Loading