Routing Between 2 Segments of Networks.

From: Vikrant (anonymous_at_discussions.microsoft.com)
Date: 05/04/04 

Date: Tue, 4 May 2004 05:33:45 -0700

Hi,
I have 2 networks. 192.168.0.0 and 10.0.0.0 segments.
How do i accompolish routing between the two with a single
windows 2000 server configured as a router.
Want a host in 192 segment to talk to another host in 10
segment.
I am able to ping to the router interface of 192 segment
from my 10 segment host.
Can anyone help in this?
Regards
Vikrant

Relevant Pages

  • Re: Win2k3 LAN Routing Questions
    ... All you need is a device with an interface in each segment with IP ... Internet router to work. ... I'm new to RRAS and routing, ... The segmented network would look like this. ...
    (microsoft.public.windows.server.networking)
  • One more bit of info.
    ... One other item I've discovered is that the RRAS machine CANNOT ping a host ... If there was no other network involved, you simply make the router the ... Traffic for the "other" segment goes to ... The segmented network would look like this. ...
    (microsoft.public.windows.server.networking)
  • Re: Setting up local network with router.
    ... The network segment between the DSL modem and the D-Link router. ... use my PC at 172.16.0.50 to request a web page from www.google.com. ...
    (microsoft.public.win2000.general)
  • Re: AppleTalk and Netatalk redeux
    ... I think a segment is simply all the devices on the same cable. ... These are roughly analogous to an ethernet hub for the AsanteTalk, and an ethernet router for the Gatorbox. ... With the AsanteTalk, you want the netatalk machine to be the network manager, called a seed router. ...
    (comp.sys.apple2)
  • Re: Expanding Subnet
    ... You just add a LAN Router into the system and create the new ... segment off of the router's other interface. ... You would then move Hosts to the new segment ... need to stay below 250-300 hosts for ethernet to remain efficient. ...
    (microsoft.public.windows.server.networking)