Re: Windows Shares through a Firewall?
Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance
Next message: Matt Hickman: "Re: NetBios, WINS, and Name Resolution, Oh My!"
Date: Fri, 12 Mar 2004 21:02:30 -0600
I've done that, but it doesn't seem to work. The client on the WAN side of
the router can't connect due to a path not found error. Is there anything
else I might be missing here?
> You have to open the firewall to the IP address of the machine that has the
> share on it, and open up TCP Ports 137 and 138 on it.
Next message: Matt Hickman: "Re: NetBios, WINS, and Name Resolution, Oh My!"
Relevant Pages
- DD-WRT Wireless mode on WHR-G54S
... I want to set up one WHR-G54S attached to the cable modem via the WAN port. ... Then I want to use another WHR-G54S as a wireless access point where computers will be plugged into the LAN ports. ... Which Wireless Mode should the cable-attached router be set to? ... Client mode – The radio interface is used to connect the internet-facing side of the router as a client to a remote accesspoint. ...
(alt.internet.wireless) - Re: Accurate Broadband Speed Tests
... The WAN interface of the router should also be setup with a ... The first test should be with both the server and client plugged into ... depends on the router processor speed, and the number of features, ...
(alt.internet.wireless) - Re: Setup offsite, move onsite?
... Configure the LAN of that router to be the subnet that you will have at the ... WAN side at the client. ... Plug the WAN NIC of your server into that LAN and ...
(microsoft.public.windows.server.sbs) - Re: setting up a 10.1 box to become a router
... Can you do a tracroute from the router to 64.233.183.99 ... What is the IP adress of eth0? ... What is the IP adres of the WAN and isn't there a modem in between? ... what does `tracroute 64.233.183.99` on the client give you? ...
(alt.os.linux.suse) - Re: Urgent! New router and big disaster
... it's quite possible you misconnected the nics when you put the server ... just File and Printer Sharing and the Microsoft Client ... running the internet connection wizard, ... I wonder if I may have missed a firewall setting on the router as well. ...
(microsoft.public.windows.server.sbs) |
|
