Re: Linksys WMP300n locking system tight

I've seen similar problems caused when installing pci controlers.
Sometimes cured by a combination of Bios / Firmware updates, on other
occassions the hw manu, in my particular case Adaptec, stated they had
experienced such problems when attached to certain mobo's. They had no cure,
or explanation, for the incompatibility.

"Jeffery Smith" <JefferySmith@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0FE7566E-5C4B-4E9D-960F-21216B543CA7@xxxxxxxxxxxxxxxx
I'm hoping someone else has seen this and figured out an answer. I have a
couple of HP DX5000 series systems with Adaptec RAID controllers in them.
I
attempted to install a LINKSYS WMP300n controller, and the system locks
regularly. Once I remove the WMP300n, everything works fine. I
temporarily
have them hard-wired and using a USB NIC. Linksys said it is probably an
Interupt conflict. I found that if I disable the internal SATA, that
everything works, but the RAID controller doesn't support the CD-ROM, and
with the internal SATA disabled, I don't have a CD. I've tried the latest
Linksys drivers. Has anyone else seen anything like this?
--
Best Wishes,

Jeffery Smith


.

Loading