SCSI RAID

Hi

I have a Dell PowerEdge 2650 w/ a Scsi Raid controller PERC2 3/Di. One
of the HDDs has failed.This hard drive was a Scsi Ultra160.
Unfortunatelly, these hard drives are not available locally. I tried to
replace it w/ another hard disk (ultra320) but it didn't work. Will it
work if I replace all HDDs of the raid with Ultra320? or I still need
to change the controler ?

Thanks all,
Hussein Alsayiegh

.

Relevant Pages

  • Re: SCSI RAID
    ... I have a Dell PowerEdge 2650 w/ a Scsi Raid controller PERC2 3/Di. ... of the HDDs has failed.This hard drive was a Scsi Ultra160. ... these hard drives are not available locally. ...
    (microsoft.public.win2000.hardware)
  • Re: Setting up an external hard drive - partioning and sharing issues
    ... copies of the files on the 3 hard drives on my 2 computers, ... anything to be gained by subdividing it into multiple partitions? ... Might I suggest that you consider a disk-cloning or disk-imaging program to ... maintain a comprehensive backup of *all* the data on each of your HDDs? ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Dual Removable Drives as a Backup Solution(?)
    ... hard drives, and then cloning, cyclically, between the two using ... Acronis True Image. ... I also found that if I had both attached, when I decided to remove restore points, both HDDs were being addressed at the same time! ...
    (microsoft.public.windowsxp.general)
  • Re: Cabling question
    ... > plugged into a PC I slot instead of into one of the two sockets on his ... like plugging the hard drives into the ... > motherboard instead of into a CPI slot? ... It's possible the system bios can't handle large HDDs (over 8GB, ...
    (microsoft.public.win2000.general)
  • Getting A New HDD And Need To XFR To It
    ... setup onto 2 750GB WD RE3 HDDs'. ... I need to clone or ghost to one of the new hard drives. ... 610W CORSAIR PSU ...
    (microsoft.public.windows.vista.hardware_devices)