Re: ide raid situation update - disregard previous

Tech-Archive recommends: Speed Up your PC by fixing your registry

So is the RAID volume using the old CDRW drive letter? If so give the CD a new one in Disk Manager.

greg wrote:

I bought adaptec raid card 1200a and installed it in slot everything

I booted computer (w2k server)
I installed raid management soft
I configured raid 1

I figured out that i nneded to create volume on new disk so now raid is
showing


BUT in windows explorer my cdrw drive stoped showing!

I go to device manager it says everything is OK
and it shows it is SONY so it recognized it

what happened?

Thanks
GSL




.

Relevant Pages

  • Re: Server hardware replacement
    ... It would be the Mirroring within Server 2003 if I understand you correctly. ... Two dynamic drives and the configuration from Disk Manager. ... Raid protection is ... I know Adaptec produce hardware Raid ...
    (microsoft.public.windows.server.general)
  • zfs on a SAN
    ... else I'm pretty excited about it but I'm starting to see some potential problems. ... ZFS works best when given whole physical disks. ... volume manager, such as Solaris Volume Manager, Veritas Volume Manager, or a ... So with ZFS - would I be better off using the SAN for RAID? ...
    (comp.unix.solaris)
  • Re: How to create a Mirror in XP
    ... Well I would do the hardware Raid and the Raid is built into the ... > things like Partition Manager or other common utilties. ... >>> intention to use XP Disk manager and create a Mirror. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Mirrored drives not showing as mirrored in Windows
    ... Device Manager says the controller is a "Intel Embedded Server RAID ...
    (microsoft.public.windows.server.general)
  • Re: Hard drive not visible from My Computer or Disk Manager
    ... Manager, but is not visable in My computer. ... >Do you have these set up in RAID? ... >> HDD in My Computer nor in Disk Manager. ... >> upon reboot. ...
    (microsoft.public.windowsxp.hardware)