RAID 5

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Trixie (anonymous_at_discussions.microsoft.com)
Date: 03/10/04 

Date: Tue, 9 Mar 2004 18:45:07 -0800

I ordered a new computer with 4 hard disks that is
configured in RAID 5 and a pre-installed Windows Server in
it. When I boot up the machine, I checked the Disk
Management console and the disks are configured in 1
logical disk with 2 partitions. But when I checked the
systems config of the raid controller, it was configured
to RAID 5.

How will I be able to see the disks in RAID 5
configuration in Computer Managment?

Relevant Pages

  • Re: Attached Storage Configuration - Exchange
    ... Answer to Edwin - Yes you are correct on the RAID setup. ... disks in a RAID 10 config, with the 7th set as a hot spare. ... How were you planning a RAID-10 configuration on 7 disks? ... You'll need a shared LUN for the Logs for each storage group. ...
    (microsoft.public.windows.server.clustering)
  • No SATA disks appear on E7520 with 5.4-RELEASE
    ... I just got some SuperMicro 6014H-T servers in the door. ... The system comes with this funky Adaptec thing that does a "fake RAID" ... What I get is the system to boot the install disk, but no disks appear. ...
    (freebsd-stable)
  • Re: SBS 2003 wont boot
    ... disks in a RAID 5 config. ... and it wouldn't boot properly. ... Please click OK to shutdown this system and reboot into directory ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 wont boot
    ... disks in a RAID 5 config. ... SBS Premium - SP1 applied. ... and it wouldn't boot properly. ...
    (microsoft.public.windows.server.sbs)
  • Re: Software RAID 0 and linux 2.6.8.1
    ... hardware RAID? ... card and am mirror two disks on which I have my Debian build. ... have dual boot, I'm positively using hardware not software RAID and I ... When a reboot fails because of a kernel change or whatever, ...
    (Debian-User)