Re: Group Policy droipping Off.

See if this helps:
http://support.microsoft.com/kb/250842/

hth
DDS

"Haggis" <Haggis@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4EA5AA67-01CE-4AC1-9DCF-73A7B238B34F@xxxxxxxxxxxxxxxx
Background is;
W2K3 network, both DNSPri and Sec on our network. WPAD setup in DHCP scope
and DNS entry. THese configurartions are correct and working. Users are
and
do resolve to the ISA server set up as a single NIC proxy server. So they
are
only going to proxy if the GPO is working. It does work for a while then
for
some reason users just seem to drop the proxy applied GPO setting and then
start to resolve through the gateway specified in DHCP scope.

I could set the gateway as the ISA server , my main concern is that users
will have no issues that are mobile with laptops, but that should be fine.
This doesn't change that fact that GPO settings ARE dropping....strange.
"Danny Sanders" wrote:

What DNS server do they use for preferred DNS server? What do they use
for
alternate?


hth
DDS

"Haggis" <Haggis@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:9484C981-AAB5-459E-A8E7-3EB7A84B87EF@xxxxxxxxxxxxxxxx
yes they have a second route. Our proxy is not running as a gateway
with 2
Nics, so if their proxy settings drop off they go through the normal
gateway.
I know that they are dropping off because they stop appearing in our
GFIwebmon and ISAlogs.

"Danny Sanders" wrote:

I am currently applying a group policy to our users that sets the
Automatically Detect settings checkbox for internet explorer. It
seems
like
after a short while the setting drops off and the users are no more
going
through the proxy server.


Do you actually have a second rout to the internet besides going
through
the
proxy?

What makes you think that they are no longer using the proxy server?


hth
DDS


"Haggis" <Haggis@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6DADA735-8A4F-41EE-9EC7-F4A613AFA172@xxxxxxxxxxxxxxxx
I am currently applying a group policy to our users that sets the
Automatically Detect settings checkbox for internet explorer. It
seems
like
after a short while the setting drops off and the users are no more
going
through the proxy server.

When i was previously setting the proxy server configurations
through
group
policy (now using WPAD) it was doing the same thing. I am sure users
are
not
changing the setting themselves, it is happening to all users. They
are
definitely taking proxy settings are being routed through it and
then
the
setting just seems to stop working. I have to create a new policy
and
drop
it
on the OU again

What gives???








.

Relevant Pages
Loading