Re: Domain users

• Previous message: Frank: "Re: Use GPO to Add Computers to the Domain?"
• Maybe in reply to: George Hester: "Re: Domain users"
• Next in thread: Steven L Umbach: "Re: Domain users"
• Reply: Steven L Umbach: "Re: Domain users"
• Messages sorted by: [ date ] [ thread ]

Date: Tue, 30 Nov 2004 15:28:03 -0500

Yeah buddy. I think you got it. I really don't think this is as hard as it looks at first. I'm new to this and so
even though something works it may not be the right thing. Then after a while when it isn't, ISSUES start to
appear. And believe me I had (have) ISSUES.

I knew what to do after you said what you said and I went ahead and did it. I put the Windows XP client at its
static IP address (that is provided by the Router) and set its TCP\IP properties to look to my Domain Controller
for the DNS Server. All done in the Local Administrator account of course after I put everything back to
WORKGROUP properties.

It's funny because all the icons chnaged after I put it in the Domain. I had real icons signifying various Domain
properties whereas before I think I had a mixture of WORKGROUP and Domain icons.

Now when I go to Locations... I see Entire Directory not the Local Machine's name. So I think that's right. It
wasn't all for nought though. The Domain users I had in it when it wasn't right are still OK and the one I set as a
User in the Domain and an Administrator in Windows XP still has all its Properties. Thanks Microsoft and you too Steve.

Now I just got to get that dang USB Printer on the Domain Server to work in the client....

-- 
George Hester
_________________________________
"Steven L Umbach" <n9rou@n0-spam-for-me-comcast.net> wrote in message news:x2Tqd.177043$R05.112694@attbi_s53...
> The procedure to add groups is a bit different for XP that W2K for sure. 
> When you try to add a group you will see a box for "locations" where you 
> should be able to select the domain. It may help to make sure you logon to 
> the computer as a domain user when you try to do such. If you have tried 
> this and do not see the domain in the locations make sure your dns 
> configuration is correct in the domain, in that the first domain controller 
> point only to itself  as it's preferred dns server and as shown by ipconfig 
> /all and that the other domain controllers point to the first domain 
> controller and then themselves as their preferred dns server. Domain client 
> operating systems W2K and XP Pro MUST point only to Active Directory domain 
> controllers as their preferred dns server. Also use the support tool netdiag 
> on first the domain controller and then your XP Pro domain computer to make 
> sure no errors are reported for dns, dc discovery, trust/secure channel, or 
> kerberos. Problems such as those could cause the domain groups to not show 
> in the list of available groups on your domain computer.  --- Steve
> 
> http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B291382  -- AD 
> dns FAQ.
> http://www.microsoft.com/downloads/details.aspx?familyid=aae64b62-27c0-4523-8af9-66a968a8c942&displaylang=en   
> -- netdiag.
> 
> "George Hester" <hesterloli@hotmail.com> wrote in message 
> news:uL1cRDp1EHA.2624@TK2MSFTNGP11.phx.gbl...
> > Hi Steve.  I think I got it.  See I called the user on the Windows XP the
> > same name as I called it in the Domain Windows 2000 ADV Server.  But 
> > signing
> > in on either of those two resulted in access denied issues even though the
> > local user in XP was part of the Administrators group.  It turns out I had
> > this wrong but I can tell you the wizards in XP did not help.  The reason
> > being when I tried Locations to point to the domain I was only getting 
> > local
> > groups on the Local machine.  I have still not figured out how to get the
> > groups in the domain to show on the client.  But instead what I did is 
> > just
> > type it in domain\user in XP.  That worked.  So now I have a user in the
> > domain who has Admin rights on the client.  That is just a DoimainUser.
> > Nothing more.  But the user is an Admin on the Local machine Windows XP.
> > That's good enough for what I wanted to do right now.  I still would like 
> > to
> > get a list of the Groups in the domain on the client but that's just not
> > happening.  It was a cinch in Windows 98.
> >
> > --
> > George Hester
> > _________________________________
> > "Steven L Umbach" <n9rou@n0-spam-for-me-comcast.net> wrote in message
> > news:2PIqd.174658$R05.91402@attbi_s53...
> >> As a regular user they will not be able to install much of anything. If
> >> Group Policy software installation does not work for you, try adding the
> >> domain users account to the power users group on their local machine 
> >> which
> >> may allow them to install the software without being a local
> >> administrator. --- Steve
> >>
> >>
> >> "George Hester" <hesterloli@hotmail.com> wrote in message
> >> news:uEdxXAe1EHA.3448@TK2MSFTNGP09.phx.gbl...
> >> Hmmm.  Well actually I dont't know what the install file type is.  The XP
> >> user wanted to use Windows Messenger in Windows XP.  Doing so we were
> > faced
> >> with a update message.  We at first said, 'No" and that was the end of
> >> Windows Messenger.  So we diecided to say, "yes."  Installation Denied.
> >>
> >> So I guess there is no way to allow a user in a Domain to install 
> >> anything
> >> on their machines?  Great.
> >>
> >> --
> >> George Hester
> >> ________________________________
> >> "Steven L Umbach" <n9rou@n0-spam-for-me-comcast.net> wrote in message
> >> news:6Awqd.579942$mD.423479@attbi_s02...
> >> > As long as the installs are .msi packages [ Windows Installer Package]
> > or
> >> > can be converted to .msi packages you can use Group Policy to assign or
> >> > publish software to users or assign software to computers. If you have
> >> > updates from Windows Updates that are considered critical updates, they
> >> > can
> >> > be installed using Automatic Updates install by schedule option which
> > does
> >> > not require that the user be local administrator. See the link below 
> >> > for
> >> > more info on using Group Policy to manage software installs which
> >> > basically
> >> > involves creating a share called a software distribution point where 
> >> > you
> >> > put
> >> > the .msi packages you want to deploy and then configuring Group Policy
> > so
> >> > that the proper users or computers have access to the .msi packages
> > which
> >> > can be installed automatically, show in add and remove programs, show 
> >> > as
> > a
> >> > desktop shortcut, or are installed first time a user tries to access
> >> > associated file such as a .doc file which would install Word. --- Steve
> >> >
> >> >
> > http://www.microsoft.com/windows2000/techinfo/planning/management/swinstall.
> > asp
> >> >
> >> > "George Hester" <hesterloli@hotmail.com> wrote in message
> >> > news:OTUhEwb1EHA.1860@TK2MSFTNGP15.phx.gbl...
> >> > I just set up a Domain using Windows 2000 Advance Server SP3 as the
> > Domain
> >> > Controller.  I have a Windows
> >> > XP client.  They use a logon to the domain that I have in Windows 2K as
> > a
> >> > Domain User.  But in Windows XP I
> >> > am finding much that is denied to the user.  They needed to install an
> >> > Updated Windows Messenger and doing so
> >> > Error Access denied.  Now I'd like to keep the logon in Doman Users but
> >> > I'd
> >> > like them to have at least some
> >> > modicum of istall priviledges.  Can you tell me how this is done in a
> >> > domain
> >> > setting or maybe suggest a Microsoft
> >> > white paper that discusses how to set up Group Policy so what I want 
> >> > can
> >> > happen?  Thanks.
> >> >
> >> > --
> >> > George Hester
> >> > _________________________________
> >> >
> >> >
> >>
> >>
> >
> > 
> 
> 

• Previous message: Frank: "Re: Use GPO to Add Computers to the Domain?"
• Maybe in reply to: George Hester: "Re: Domain users"
• Next in thread: Steven L Umbach: "Re: Domain users"
• Reply: Steven L Umbach: "Re: Domain users"
• Messages sorted by: [ date ] [ thread ]