Re: AIC-7899 controller
- From: "Steve Amiro" <joe@xxxxxxx>
- Date: Wed, 6 Jun 2007 07:44:20 -0400
Well,
I first tried the one I found on Acer's Website and then AIC one and got the
same result. I'll check again on Acer's Website and see if there is any
other drivers available.
Thanks
Steve
"John John" <audetweld@xxxxxxxxxxx> a écrit dans le message de news:
OPNL8i6pHHA.3888@xxxxxxxxxxxxxxxxxxxxxxx
It sounds like you are using the wrong drivers. Was the SCSI controller
supplied by Acer?
John
Steve Amiro wrote:
Thanks John for replying.
Though your're right on the F6 process and it works up to that point. On
the 2000 setup screen, the process keeps saying that it doesn't find any
Hard Disk??? SCO Unix Open Server 5 was previously installed and I
haven't changed any boot up config. Unless I have the wrong drivers but
I did download AIC-7899 for Win2k....
Thanks again. It's appreciated
Steve
"John John" <audetweld@xxxxxxxxxxx> a écrit dans le message de news:
uAi3Ym2pHHA.3644@xxxxxxxxxxxxxxxxxxxxxxx
At the beginning of the installation process you have to press F6 when
prompted and supply the controller drivers on a floppy diskette. Pay
close attention to the messages at the bottom of the screen when the
setup begins and you will see a prompt instructing you to press F6 to
install RAID/SCSI drivers.
John
Steve Amiro wrote:
Hi,
I want to install win2k server on a ACER altos G610 with AIC-7899 SCSI
controller but the win2k installation process doesn't see it and then
can't detect HD. How can I make Win2k setup to see hard drives?
Thanks in advance.
Steve Amirault
.
- Follow-Ups:
- Re: AIC-7899 controller
- From: John John
- Re: AIC-7899 controller
- References:
- AIC-7899 controller
- From: Steve Amiro
- Re: AIC-7899 controller
- From: John John
- Re: AIC-7899 controller
- From: Steve Amiro
- Re: AIC-7899 controller
- From: John John
- AIC-7899 controller
- Prev by Date: Re: Installing Legit Win2000 Pro SP4, but getting 2 Trojans every time.
- Next by Date: Re: Installing Legit Win2000 Pro SP4, but getting 2 Trojans every time.
- Previous by thread: Re: AIC-7899 controller
- Next by thread: Re: AIC-7899 controller
- Index(es):
Relevant Pages
|