Re: No one can map my pc

Hello and thanks again,

Problem was solved. Apparentelly "I" disabled SERVER service (Don't know how
since i don't recall myself browsing in Administrative Tools in Control
Panel), while i was typing the commands you suggested it prompted me to
start SERVER services, so i did and now everything is working smoothly with
shares and my co-workers can map to my pc.

Thanks for your help, was appreciated.

JR.

"Pegasus (MVP)" <I.can@xxxxxxx> escribió en el mensaje
news:OPuegGBhHHA.4140@xxxxxxxxxxxxxxxxxxxxxxx
It is not clear from your tests if the problem is caused
by incorrect names or non-existing shares. Let's try some
more tests.

1. On \\AuxComp, open a Command Prompt and type
these commands:
md C:\Test
net share Test=C:\Test
ipconfig
Make a note of this PC's IP address.

2. On your other PC, type these commands in a
Command Prompt and report the results:
ping aaa.bbb.ccc.ddd (Use the correct IP address for \\AuxComp)
net use Q: \\aaa.bbb.ccc.ddd\Test

If you still have problems, remove, then re-install all networking
components on the problem PC.


"Jaime Rodríguez" <nouser@xxxxxxxxxxx> wrote in message
news:u%23cmB$AhHHA.4924@xxxxxxxxxxxxxxxxxxxxxxx
Thanks for the quick response,

Try that and here are the results:

net use Q: \\auxcomp\c$
RESULT: System error 67
Can't find specified network name (Translation from spanish, hope is
accurate)

net use \\auxcomp\c
RESULT: System error 67
Specified network name is no longer available

net use \\auxcomp\c$
RESULT: System error 64
Specified network name is no longer available

As you can see, tried a few ways to use this command and still the same
thing. Tried from a WinXP box. Also forgot to mention that i can map to
the
other pc's in my network

What should i do next??

JR.
"Pegasus (MVP)" <I.can@xxxxxxx> escribió en el mensaje
news:#9N9tA6gHHA.1312@xxxxxxxxxxxxxxxxxxxxxxx

"Jaime Rodríguez" <nouser@xxxxxxxxxxx> wrote in message
news:%23CVj%23w4gHHA.5052@xxxxxxxxxxxxxxxxxxxxxxx
Hello folks,

W2000/SP4, suddenly no one in my network can map my pc, users can
see
my
pc
on network but can't map it. Haven't apply any updates since i don't
have
automatic updates turned on. Haven't unninstall or install anything
lately,
haven't changed any network or TCP/IP settings, i don't know what
might
be
causing this. I really need to solve this issue. I'm sharing my
printer
and
have important files my co-workers use thru my pc.

Any ideas why is this happening, don't know where to start to give a
solution.

JR.

Try this on one of the other PCs and report the result:
- Click Start / Run / cmd {OK}
- Type this command:
net use Q: \\JR_PC\JRShare

Use the correct PC and share names.












.