Re: Unusual STOP 0x0...7B error

That probably means the image was corrupt or the new disc was not properly prepared before the ghosting process. You will have to re-image the disk.

http://service1.symantec.com/SUPPORT/ghost.nsf/docid/2000112817032525
http://service1.symantec.com/SUPPORT/powerquest.nsf/docid/2005052419404662?OpenDocument
http://service1.symantec.com/SUPPORT/ghost.nsf/0/12fa47d4dc98df6b88256c3f005576d2?OpenDocument

Also, make sure that the Windows 2000 installation is at SP4 level, that it has the 48-bit LBA support enabled and that the SATA drivers are properly installed.

John

BSartist wrote:

I tried FDISK /MBR and now NEITHER partition will boot.

When I try to boot the XP partition, it comes up to the blue screen
that says "Windows XP" but does not display the words "Starting
Windows" and it just hangs there.


John John wrote:

Try Fdisk /mbr on it.

John

BSartist wrote:


Drive letter did not change. I was trying to make sure it stayed the
same. When I ghosted to the new drive I wasn't sure if the drive letter
would come with it. I wanted it to stay as C:.

It is C: but still will not complete the boot.

Bill

John John wrote:


BSartist wrote:


...

I tried moving the disk between the two controllers and the same thing
occurs. I tried using disk manager to force the disk letter to C: (what
it originally was for the Win2K boot). Still no dice.

Are you saying that the drive letter was changed? Seems to me that
doesn't yield an 0x7b error. Anyhow, from the Windows XP installation
edit the Windows 2000 registry: http://support.microsoft.com/kb/223188/

You can also try the Windows 98 fdisk /mbr command on the non booting
drive.

John



.

Relevant Pages

  • Re: *** STOP: (0x0000007B,0XF85438D0,0XC000009C,0X00000000,0x00000
    ... To start the Recovery Console, start the computer from the Windows XP CD-Rom ... and fixmbr for limited disk repairs. ... | Dave I could not create a boot disk at home, but I had created one at work ...
    (microsoft.public.win2000.general)
  • Re: CHKDSK repeatedly runs.
    ... How do I change the registry so this doesn't keep happening? ... There are times when the disk checking utility needs to ... run before you boot into Windows. ... I have a two year old laptop running Windows XP. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: New HDD Installation
    ... while your installation is up and running use the Disk Management tool and make sure that you have a properly identified System Partition and that it is marked as "Active". ... If it is so identified and marked and still won't boot then do both commands as Ron suggested. ... Description of the Windows XP Recovery Console ... It would take awhile but I am willing to start fresh if it gets the new HDD in and the small out. ...
    (microsoft.public.windowsxp.general)
  • Re: Start Up Error Messages
    ... That hangs around for c 20 seconds and then the boot ... Go a head and remove and run disk clean up and see if the check disk will ... How To Schedule Tasks in Windows XP ... Under General Tab clear your History, ...
    (microsoft.public.windowsxp.basics)
  • Re: Moving beyond "Tutorial: Building and Deploying a Run-Time Ima
    ... try running TAP.exe under Windows 98 to ... missing a critical boot device, ... > I did partition/format the disk in the development PC using NTFS. ... drive while it was in the target PC and "it" works fine. ...
    (microsoft.public.windowsxp.embedded)
Loading