Re: How to set up dual boot manually? ... I can fix this be disabling and reenabling the raid controller.... Until I can get such a third party boot manager going, the way I boot win2k is to go into cmos and make it boot HD0 first instead of the scsi device. ... How do I make win2k see the scsi raid system on bootup, ... (microsoft.public.win2000.general)
Re: [opensuse] 10.2 no RAID to 11.0 RAID 1 ... swap a PCI card in the system, turn it back on and the RAID does not ... If the system was correctly shut down I would suspect the drives... The controller in that system is fine, ... card and the md RAID.... (SuSE)
HP Netserver ... I booted from the Win2k cd. ... I noticed that the boot partition was 2 gig FAT... ... Just for the heck of it...I disconnected the RAID array and put in a single ... So my question is why did the RAID5 array require a FAT partition to boot? ... (microsoft.public.win2000.hardware)
Re: SATA software RAID-inkernel vs hardware ... > I need to set up a server with two RAID1 SATA drives to do mirroring. ... > I was wondering if there was any point in using software RAID... > Also using a PCI card for the disc drives in place of the built in SATA... (freebsd-isp)
Re: raid hardware ... That depends on what you want: local attached (PCI card),... If you want a PCI card RAID I think there are just two choices: ... and floppy-based utitlity for configuration management.... > What RAID hardware arrays are available for OpenVMS?... (comp.os.vms)
