Re: Can't get Win2000 running


Dave Patrick wrote:
If you connected to the internet prior to installing certain updates it may
be too late.

To do a clean install, either boot the Windows 2000 install CD-Rom or setup
disks. The set of four install disks can be created from your Windows 2000
CD-Rom; change to the \bootdisk directory on the CD-Rom and execute
makeboot.exe (from dos) or makebt32.exe (from 32 bit) and follow the
prompts.

Setup inspects your computer's hardware configuration and then begins to
install the Setup and driver files. When the Windows 2000 Professional
screen appears, press ENTER to set up Windows 2000 Professional.

Read the license agreement, and then press the F8 key to accept the terms of
the license agreement and continue the installation.

When the Windows 2000 Professional Setup screen appears, all the existing
partitions and the unpartitioned spaces are listed for each physical hard
disk. Use the ARROW keys to select the partitions Press D to delete an
existing partition, If you press D to delete an existing partition, you must
then press L (or press ENTER, and then press L if it is the System
partition) to confirm that you want to delete the partition. Repeat this
step for each of the existing partitions When all the partitions are deleted
press F3 to exit setup, (to avoid unexpected drive letter assignments with
your new install) then restart the pc then when you get to this point in
setup again select the unpartitioned space, and then press C to create a new
partition and specify the size (if required). Windows will by default use
all available space.

Be sure to apply SP4 and these two below to your new install before
connecting to any network. Internet included. (sasser, msblast)
http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx

Then

Rollup 1 for Microsoft Windows 2000 Service Pack 4
http://www.microsoft.com/downloads/details.aspx?amp;displaylang=en&familyid=B54730CF-8850-4531-B52B-BF28B324C662&displaylang=en


If you're installing Windows XP then;

To do a clean install, boot the Windows XP install CD-Rom. Setup inspects
your computer's hardware configuration and then begins to install the setup
and driver files. When the Windows XP Professional screen appears, press
ENTER to set up Windows XP Professional.

(Note: If your drive controller is not natively supported then you'll want
to boot the Windows XP CD-Rom. Then *F6* very early and very important (at
setup is inspecting your system) in the setup to prevent drive controller
detection, and select S to specify additional drivers. Then later you'll be
prompted to insert the manufacturer supplied Windows XP driver for your
drive controller in drive "A")

Read the license agreement, and then press the F8 key to accept the terms of
the license agreement and continue the installation.

When the Windows XP Professional Setup screen appears, all the existing
partitions and the unpartitioned spaces are listed for each physical hard
disk. Use the ARROW keys to select the partitions Press D to delete an
existing partition, If you press D to delete an existing partition, you must
then press L (or press ENTER, and then press L if it is the System
partition) to confirm that you want to delete the partition. Repeat this
step for each of the existing partitions When all the partitions are deleted
press F3 to exit setup, (to avoid unexpected drive letter assignments with
your new install) then restart the pc then when you get to this point in
setup again select the unpartitioned space, and then press C to create a new
partition and specify the size (if required). Windows will by default use
all available space.

Be sure to apply SP2 or at least these two below to your new install before
connecting to any network. Internet included. (sasser, msblast)
http://www.microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8e-4f30-8245-9e368d3cdb5a&displaylang=en

http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx


--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect


Wow! I wish I'd had these detailed instructions before I re-installed
Win2000. I guess I get to do it all over again.

Thanks to everyone who chimed in here with advice. I'm printing out all
your suggestions, will track down some good AV software and get a
firewall to install before I go online after the new install.

"davegb" wrote:
|I re-installed Win2000 last week. Now I can barely get it to run. I
| keep getting those irritating Messenger Service messages one after
| another. I've tried to download and install SP4 but it hangs part way
| through. Now, when I try to go to any website, it times out before it
| can load. I'm getting pretty frustrated. I'm thinking that I may be
| forced to upgrade to XP Pro, but I don't really want to if I don't have
| to. Does anyone else have any suggestions? Any other alternatives?
|
| Thanks in advance.
|

.

Relevant Pages

  • Re: XP reinstall - cannot delete c partition
    ... To do a clean install, boot the Windows XP install CD-Rom. ... Setup inspects your computer's hardware configuration and then begins to install the setup and driver files. ... When the Windows XP Professional screen appears, press ENTER to set up Windows XP Professional. ... Use the ARROW keys to select the partitions Press D to delete an existing partition, If you press D to delete an existing partition, you must then press L to confirm that you want to delete the partition. ...
    (microsoft.public.windowsxp.basics)
  • Re: Software program not loading
    ... To do a clean install, either boot the Windows 2000 install CD-Rom or setup disks. ... Then *F6* very early and very important (at setup is inspecting your system) in the setup to prevent drive controller detection, and select S to specify additional drivers. ... Use the ARROW keys to select the partitions Press D to delete an existing partition, If you press D to delete an existing partition, you must then press L to confirm that you want to delete the partition. ...
    (microsoft.public.win2000.general)
  • Re: how do you reboot with out disk?
    ... To do a clean install, boot the Windows XP install CD-Rom. ... Setup inspects your computer's hardware configuration and then begins to install the setup and driver files. ... When the Windows XP Professional screen appears, press ENTER to set up Windows XP Professional. ... Use the ARROW keys to select the partitions Press D to delete an existing partition, If you press D to delete an existing partition, you must then press L to confirm that you want to delete the partition. ...
    (microsoft.public.windowsxp.general)
  • Re: new cpu/mobo/memory, old HD, Blue Death Screen when upgrade past SP2
    ... To do a clean install, either boot the Windows 2000 install CD-Rom or setup ... existing partition, If you press D to delete an existing partition, you must ...
    (microsoft.public.win2000.general)
  • Re: system restarts but does not save clea install
    ... To do a clean install, boot the Windows XP install CD-Rom. ... your computer's hardware configuration and then begins to install the setup ... existing partition, If you press D to delete an existing partition, you must ...
    (microsoft.public.windowsxp.general)