Re: Question about eTower 633id
- From: "paulmd@xxxxxxx" <paulmd@xxxxxxx>
- Date: 20 Aug 2006 19:53:36 -0700
cce wrote:
I upgraded the OS from Windows ME to Windows 2000 on an eTower 633id.
I installed the modem driver available at this Web site:
http://www.priorityonesupport.com/downloads/emachines/ -- the modem is
a Connexant (56K ITU V.90 PCI Fax/Modem).
After installing the modem drivers (the modem "shows up), I am left
with the following hardware issue: the PCI Simple Communication
Controller is showing a configuaration problem, that is, no driver.
Yep.
My question is, where would I get such a driver?
There is a generic (and kinda scary) driver for HSF conexant chipset
modems. Don't use HCF, or you'll get a BSOD you can recover form only
by reinstalling the OS. I've Done that.
http://www.conexant.com/support/md_driverdownload.jsp
This driver will appear to do nothing for several *minutes* (really,
minutes), then evetually you will get a message about digital signature
not found. Install the driver anyway.
I've searched around
for it and have had no luck. My impression is that this is a PCI -> MB
issue, not a modem issue, per se.
It's not in this case. Windows 2000 knows about the intel chipset these
use.
If this is not the case, would it
make sense just to purchase a new internal modem?
Yes, get a good US Robotics if you can find one. The modem that comes
with the Emachine, like the rest of the components in the emachine is
subpar.
Broadband would make even more sense. I know that it works surprisingly
well on these old etowers. All you need is to purchace is a NIC. (and
service).
The motherboard for the 633id:
Cognac Micro ATX (ATX V1.2 form factor) motherboard, TriGem, Korea
Intel Socket-370 (370pin PPGA Socket) for Intel FC-PGA Celeron CPUs
Integrating on-chip Graphics controller and Memory Controller Hub
(GMCH): Intel FW82810, as well as Intel I/O Controller Hub (ICH) and
AC 97' Controller.
I hope this makes some sense.
Thanks.
.
- References:
- Question about eTower 633id
- From: cce
- Question about eTower 633id
- Prev by Date: Re: Question about eTower 633id
- Next by Date: Re: W2K System Shuts Down - Help. Please
- Previous by thread: Re: Question about eTower 633id
- Next by thread: Re: Bootup Question
- Index(es):
Relevant Pages
|
