Re: Clock runs slowly

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

sbsuser wrote:
I have a 2k server running as a member server of sbs domain and syn
time when logon. However, the clock of this 2k server has some
problems, for every second it runs, it actually uses normal 4
seconds.

A failing mb battery can cause the clock to do this.

--
Rich Greenberg N Ft Myers, FL, USA richgr atsign panix.com + 1 239 543 1353
Eastern time. N6LRT I speak for myself & my dogs only. VM'er since CP-67
Canines:Val, Red & Shasta (RIP),Red, Zero & Casey, Siberians Owner:Chinook-L
Retired at the beach Asst Owner:Sibernet-L
.

Relevant Pages

  • Re: Which release notes say sts$manager:utc$configure_tdf is obsolete
    ... >>in UTC, and after comparing it to the time as determined from its ... I think it will only attempt to change the clock if it is less than ... or a ST clock just after the spring forward, and NTP would fix it. ... guess of the real time that it makes from polling the time server. ...
    (comp.os.vms)
  • Re: Easy NTP Time Server question for the experts out there.
    ... >> I want to setup my server to automatically check the time on an NTP ... >> able to set the time from the command prompt with the ntpdate command. ... In some cases it may not be practical for ntpd to run continuously. ... to exit just after setting the clock for the first time. ...
    (alt.os.linux.suse)
  • Re: Correcting my time servers clock drift on AlphaES40s / Tru64
    ... Keeping several machines together is a pleasant side-effect of a working NTP setup, but is not a design objective of NTP. ... is then a stratum 1 time server, Phillip looks to Terrance as its time server, and all is well. ... use ntp on phillip to get time from ntpd on Terrance, with Terrance reading it's system clock. ... In that case, you need to create a clear server hierarchy, not to peer, ...
    (comp.protocols.time.ntp)
  • Re: ntpd Not Converging
    ... I have a Dell server running Red Hat Enterprise Linux. ... real-time clock typically gains about 500ms. ... do not use those # systems as peers for synchronization. ... I'd suggest starting ntpd with the -x option. ...
    (comp.protocols.time.ntp)
  • Re: Correcting my time servers clock drift on AlphaES40s / Tru64
    ... of a working NTP setup, but is not a design objective of NTP. ... is then a stratum 1 time server, Phillip looks to Terrance as its time server, ... with Terrance reading it's system clock. ... In that case, you need to create a clear server hierarchy, not to peer, ...
    (comp.protocols.time.ntp)