Re: Need to enable several processes

John John <audetweld@xxxxxxxxxxx> wrote in
news:uSoTTonlGHA.3732@xxxxxxxxxxxxxxxxxxxx:

Make sure that these services are running:

COM+ Event System
Remote Access Connection Manager
Remote Procedure Call (RPC)
Telephony
System Event Notification
Network Connections
Plug and Play

John

Thanks for the above.

They are now nearly all running, I used the utilities Codestuff Starter
and Whats Running to between them identify and check all above. The
exception is Remote Procedure Call (RPC) RPC Locator. I tried to enable
it but it won't. There is another Remote Procedure Call (RPC) RPC Ss
that is running.

I rebooted, still no luck. When I lost the icon, I had only disabled 2-3
items, one IIRC was MS Webcheck, don't see it now.

Advice?

Mike


ms wrote:

John John <audetweld@xxxxxxxxxxx> wrote in
news:#J1T66jlGHA.4772@xxxxxxxxxxxxxxxxxxxx:


In-line.

ms wrote:


In an earlier post, I asked about deletng several processes.

I disabled the wrong process and lost my system tray DUN icon. DUN
still works fine from my desktop icon, but when connected, it does
not now show up in the system tray.

I tried enabling processes that were disabled from some time in the
past.

These services show as stopped and will not enable:

Windows Net Meeting for Remote Desktop

You don't need that.


Windows Messinger

You need that even less...

Net Logon

You don't need that either.


How to enable these services?

How to get my system tray DUN icon back?

How about Right-click on the icon, select Properties |Shortcut | Find
Target and Right-click the target again to see what is available. Or
you can access it through the Control Panel | Network and Dial-up
Connections.

The thing is handled by Rasphone so you can also just go to Start
Menu
| Run and type rasphone in the dialogue box and click OK. Select
the connection and click on properties. There you will see a check
box at the bottom, Show icon in taskbar...

John



TIA

Thanks, John, just the data I needed.

But, no luck.

Exactly as you said, ran rasphone, but in my DUN screen, "show icon
in taskbar" is *already* enabled. I also started with the desktop
shortcut, got to the same screen, same result.

I goofed somehow, disabled something this AM that now it does not
show up in the taskbar, of course I tried reboot, no luck.

I did disable MS Webcheck early this AM, now can't find it, could
this be it?

Thanks,

Mike




.

Relevant Pages

  • Re: Timout control with RPC/HTTP
    ... specifies the minimum connection timeout used by the ... client and RPC Proxy, in seconds. ... Microsoft CSS Online Newsgroup Support ...
    (microsoft.public.exchange.admin)
  • Re: Timout control with RPC/HTTP
    ... please also check the RPC web site connection timeout settings ... Maybe the idle timeout settings depend on here. ...
    (microsoft.public.exchange.admin)
  • Re: Adding Simple TCPIP Services via Add or Remove Programs
    ... I have the Remote Procedure Call (RPC) Locator ... As far as DNS settings, ... Right click your connection | Repair ... A Description of the Repair Option on a Local Area Network or High-Speed ...
    (microsoft.public.windowsxp.general)
  • RPC Problem with WinXP SP2
    ... I have a Client application which is installed on a Windows XP SP 2 box. ... On start-up the application connects to the application server. ... own RPC Server, to which the application server is intended to ... This RPC connection is used to inform the client app. ...
    (microsoft.public.win32.programmer.networks)
  • RE: Outlook indefinitely "trying to connect ..." to Exchange 2003 using RPC/HTTP
    ... I understand that your issue is that the outlook ... sometime does not work when using RPC over HTTP. ... If you use the RPC over HTTP when using the WLAN for the connection, ...
    (microsoft.public.windows.server.sbs)