Re: Routing and Remote Access port fowarding does not work

They access the Internet thru the server using Routing and Remote Access.
Outbound traffic is working without a problem. VPN is working. It's the
Services and Ports on the WAN side thats not working properly. Thanks

"Pegasus (MVP)" wrote:

How do the workstations access the Internet?

"Mark Daly" <MarkDaly@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4D853499-1B74-4092-831F-F70F5717F5C8@xxxxxxxxxxxxxxxx
No hardware router. The server does the routing / VPN and I use NAT for
port
fowarding


"Pegasus (MVP)" wrote:


"Mark Daly" <Mark Daly@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:8760D74E-2134-45EA-B425-B19D685EBC35@xxxxxxxxxxxxxxxx
I have a client that I configured Routing and Remote Access and
everything
was working fine. Now they have requested to have a port forwarded to
one
of
the workstations to allow the user to access his computer using Remote
Desktop. No matter what way I configure it I can't seam to get it to
work.

I have noticed none of my port forwarding is working so I disabled
Routing
and Remote Access and re-enabled / reconfigured it and still no joy.
There
isn't anything in the Event log to assist in resolving the problem.

Is there a way to completely remove Routing and Remote Access along
with
the
previous configuration then reinstall it?



Server configuration:

Server 2003 Enterprise Edition SP1

2 Network cards (1 - LAN and 1 - WAN)



Thank in Advance!

Mark Daly

Does the client have a router? Hardware firewall? How do the
workstations access the Internet?






.

Relevant Pages

  • RE: Need help setting up a VPN server
    ... Routing and Remote Access Server Settings – ... Multilink Connections ticked ...
    (microsoft.public.windows.server.networking)
  • Re: RAS wont start.
    ... An error occurred while trying to start the Routing and Remote ... > Routing and Remote Access cannot be started because of the following ... > The Routing and Remote Access service entered the running state. ... > Server Roles: ...
    (microsoft.public.windows.server.networking)
  • RE: Remote Access/OWA
    ... Yes, you are right, you can type the Public IP address as the VPN Server ... when you are running the Remote Access Wizard. ... Port 21 enable external and internal file transfer ... Port 80 enables all nonsecure browser access, ...
    (microsoft.public.windows.server.sbs)
  • Re: RAS wont start.
    ... An error occurred while trying to start the Routing and Remote ... Routing and Remote Access cannot be started because of the following error. ... The Routing and Remote Access service was successfully sent a start control. ... Server Roles: ...
    (microsoft.public.windows.server.networking)
  • Re: PC Anywhere
    ... routing and remote access ... >> one for port 5631 point it to the IP address of the work station you want ... I went into Administrative Tools> Routing and Remote Access and, ...
    (microsoft.public.windows.server.sbs)
Quantcast