Re: Print error after loading SP1 on Windows 2003
- From: "Adam Raff" <adam@xxxxxxxxxxxxxxxx>
- Date: Fri, 11 Nov 2005 11:20:50 -0500
Hi Jason,
After the system comes up, the logon takes a very long time, longer then it
did before SP1 was installed, everything works and the printers also work.
The errors do show up in the event log but no other errors appear and we are
working fine after that. Please note that this error only shows up during
the boot of the server, after that it seems Ok and we print fine.
The problem started up after I installed SP1 and I assume that it is because
of the fact that our DNS/DHCP server is also our Print server and DC (not a
recommend setup per Microsoft but we are a small company). I guess that SP1
did some things which are now causing this error and the services are not
starting up fast enough. Per my first email this was a win2000 system which
was upgraded to 2003, the printers were created in 2000. I did not have any
issues when it was 2003. I did read something about this happening if the
printers were created on NT4 I believe or it's deleting some files and then
creating them again. One fix was to delete the print Queue and create them
again. I was trying to get a better idea on what was happening and why. I
would rather not uninstall SP1 yet since it is working just not right or it
could be working right and the new files are just not liking the config that
the server is in. No errors have shown up in two days of operation so far
so I am letting the system settle in to see what else happens.
If you would still want me to run the report that is not an issue. Just let
me know.
Thanks for your help
Adam Raff
"Jason Tan (MSFT)" <v-jasont@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:Tz9hLWq5FHA.832@xxxxxxxxxxxxxxxxxxxxxxxx
> Hi Adam,
>
> Thanks for posting!
>
> I understand that the Event ID 33 log occurred after you applied Windows
> 2003 SP1. From the error message, it seems the print spooler could not
> locate the domain controller or could not bind to the directory service on
> the domain controller. This might be because DNS cannot resolve the domain
> controller's IP address, or because the domain controller or directory
> service is not functioning correctly. I suggest you first verify if the
> DNS
> configuration is correct for now. In addition, if all are working fine, I
> suggest you uninstall SP1 temporarily and check the issue. If the issue
> still persists, please help me collect MPS_Report information for further
> research.
>
> Please note: If there is no real issue except the Event 33, you may safely
> ignore it.
>
> The Detailed steps are as the following:
> =============================
>
> Download the MPSRPT_NETWORK.EXE from the following link and then run this
> tool to gather some information from the problematic computer:
>
> http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd9
> 15706/MPSRPT_NETWORK.EXE
>
> To run this tool:
>
> 1. Double-click on the MPSRPT_NETWORK.EXE file.
>
> I understand this process may take some time, however it will not have a
> negative effect on the performance.
>
> 2. A CAB file will be generated in the
> %systemroot%\MPSReports\Network\Reports\Cab directory called
> %COMPUTERNAME%_MPSReports.CAB. The CAB file will contain the reports
> generated by the MPS Reporting Tool.
>
> 3. Send the CAB file as an attachment to v-jasont@xxxxxxxxxxxxx
>
> Hope the information helps. If there is anything that is unclear, please
> feel free to let me know.
>
> Best Regards,
>
> Jason Tan
>
> Microsoft Online Partner Support
> Get Secure! - www.microsoft.com/security
>
> =====================================================
>
> When responding to posts, please "Reply to Group" via your newsreader so
> that others may learn and benefit from your issue.
>
> =====================================================
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
>
>
>
>
>
>
>
> --------------------
> | From: "Adam Raff" <adam@xxxxxxxxxxxxxxxx>
> | Subject: Print error after loading SP1 on Windows 2003
> | Date: Thu, 10 Nov 2005 11:09:56 -0500
> | Lines: 33
> | X-Priority: 3
> | X-MSMail-Priority: Normal
> | X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
> | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
> | X-RFC2646: Format=Flowed; Original
> | Message-ID: <ueJpyEh5FHA.2716@xxxxxxxxxxxxxxxxxxxx>
> | Newsgroups: microsoft.public.win2000.general
> | NNTP-Posting-Host: 208-39-138-189.isp.comcastbusiness.net 208.39.138.189
> | Path: TK2MSFTNGXA02.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP11.phx.gbl
> | Xref: TK2MSFTNGXA02.phx.gbl microsoft.public.win2000.general:192879
> | X-Tomcat-NG: microsoft.public.win2000.general
> |
> | Good Day,
> |
> | We have a File/Print Server that is also our DC. The server also
> functions
> | as our DNS/DHCP server. Not the best but we are a small company. The
> | system was a windows 2000 (Clean install) I created 16 print Queues.
> About
> | a year later we upgraded to 2003 and had no issues with the upgrade and
> we
> | were happy. It has been running as a 2003 system for about 8 months
> with
> no
> | issues. Last night we installed/upgraded the server to SP1. Now during
> Boot
> | I get the following errors.
> |
> | Event Type: Error
> | Event Source: Print
> | Event Category: None
> | Event ID: 33
> | Date: 11/9/2005
> | Time: 6:59:38 PM
> | User: NT AUTHORITY\SYSTEM
> | Computer: Test
> | Description:
> | The PrintQueue Container could not be found because the DNS Domain name
> | could not be retrieved. Error: 54b
> |
> | For more information, see Help and Support Center at
> | http://go.microsoft.com/fwlink/events.asp.
> |
> | Does anybody have any ideas why we would be getting these errors all of
> a
> | sudden since installing SP1? We are getting 16 errors and have 16 print
> | queues.
> |
> | Thank You
> | Adam Raff
> |
> |
> |
>
.
- Follow-Ups:
- Re: Print error after loading SP1 on Windows 2003
- From: Jason Tan (MSFT)
- Re: Print error after loading SP1 on Windows 2003
- Prev by Date: Component Install/Service Pack
- Next by Date: Does Sp4 include 1,2, and 3?
- Previous by thread: Component Install/Service Pack
- Next by thread: Re: Print error after loading SP1 on Windows 2003
- Index(es):
Relevant Pages
|
