Re: Server to Server communication sucks in Windows 2000

Tech-Archive recommends: Fix windows errors by optimizing your registry

I'll give one more example here of what is happening. When I boot the
Server all the clients and the domain controller appear in My Network Places
| Microsoft Windows Network | Domain. All of them. But after a little
while everything will disappear from there except the Server. I can log out
and back in and they are all back. Little bit later they are all gone but
the Server the machine this is taking place on. The DC and clients NEVER
exhibit this behavior. Never. Maybe this is an SP4 issue because that is
the only machine at that level. I don't know what else it could be???

--
George Hester
_________________________________
"George Hester" <hesterloli@xxxxxxxxxxx> wrote in message
news:uFC#JCkrFHA.528@xxxxxxxxxxxxxxxxxxxxxxx
> Dave I just tried following this article at Microsoft:
>
> http://support.microsoft.com/kb/q135404/
>
> Do you know what this does? It said to remove the File and Printer
Sharing
> and the Client for Networks from the the NIC which is not the dedicated
> adapter. Well I did that and the result was these protocols and Services
> were removed from ALL the NICs. I think it is normal given the setup I
have
> because I don't see anything that is NOT normal in the set up and I see
ALOT
> orf Knowledge Base articles and Service Pack updates to exactly what I am
> experiencing.
>
> --
> George Hester
> _________________________________
> "Dave Patrick" <DSPatrick@xxxxxxxxxxxxxxxx> wrote in message
> news:OXmqpYjrFHA.2072@xxxxxxxxxxxxxxxxxxxxxxx
> > No, not normal.
> >
> > --
> > Regards,
> >
> > Dave Patrick ....Please no email replies - reply in newsgroup.
> > Microsoft Certified Professional
> > Microsoft MVP [Windows]
> > http://www.microsoft.com/protect
> >
> > "George Hester" wrote:
> > <snip>
> > I have to select that share two or three times before
> > | the System wakes up.
> > <snip>
> >
> >
>

.

Relevant Pages

  • RE: Printing from Win9x clients stops
    ... > and make sure this software does not interfere with SBS Server. ... > clients, please disable it and try again. ... Create a local printer and redirect the port to the network server. ...
    (microsoft.public.windows.server.sbs)
  • RE: Strange Irregular DNS/Networking Problems
    ... My network is not a complicated set up and only has one domain controller. ... problems with DNS resolving after changing DNS servers. ... I was already using the server for DHCP. ...
    (microsoft.public.windows.server.dns)
  • Re: Client performance problem windows 2003 server...
    ... >Subject: Re: Client performance problem windows 2003 server... ... >Deploying Active Directory for Branch Office Environments ... >results from not having a domain controller in a particular site. ... incorrectly applied site coverage will be bad for clients ...
    (microsoft.public.windows.server.networking)
  • Re: ISA Server & a WiFi Hotspot (some DHCP for good measure too)
    ... ISA2k4 is currently not supported on SBS ... To review - you have LAN clients that you want to have ... card for your server. ... > network with 5 client computers. ...
    (microsoft.public.windows.server.sbs)
  • RE: Users Cant Access Documents on Server
    ... Thanks for using the SBS newsgroup. ... As well as we know, if a workstation would not access network shares, then ... Leave the Default Gateway of the internal NIC blank of the server box. ... Clients That Require SMB Signing ...
    (microsoft.public.windows.server.sbs)